Top 20 Disney Princess TV/DVD Combo Questions & Answers

Need more details. Is it an hdmi hookup or a coaxial? Is your cable line hooked up directly to the TV or are you using a modem? Is it a smart TV or just regular?

The connection would be ideally a SCART cable or a phono AV cable ( red, white, yellow) which are you using? Then turn on TV, then turn on VHS, if the VHS does not show on screen, press the AV/Mode button on remote until VHS on screen!

Usually kids tv's in bedrooms collect more dust than downstairs. The laser probably needs cleaning with a special disc or stripping down and doing properly

hi good day, it sounds that their is bad parts which need to check at the power supply section of the unit. you can check the primary capacitor or a shorted regulator transistor. but make sure you have knowledge in basic electronic repair so you can perform this checking.

if no any power indicator at the front panel, the first thing you can do is tried to plug the tv in other wall ac socket. if still no power, unplug the cord then check for a broken wire. if ok, at this time you are going to remove the cover of the tv to check weather the fuse at the power supply get blown.

Check the internal speaker. If it is OK, then check and replace the earphone socket at TV.

not read

Download the user manual to your TV. It has all details about how to set and release the parental lock. Click here to download the user manual. If you fail to unlock , you might have to get into its service menu options to release the password. To know more about this visit the site named 'Electro-help'. There is details about entering in to service mode, to most brands of TVs. Pull up older posts there. Check this link and select the site named above.

use a scart lead to connect your cable tv box. then on your tv remote press the "source" button or press the "AV" button, you mainly have the options to choose AV1 and AV2 (AV2 is only available if your tv has 2 scart sockets) make sure the box is on and select any AV channel, you should now have cable tv.

If you need owner manuals GOOGLE each model number with manual to locate them.

Check the soldering points at the infrared LED of the remote. You have to open to acces this point. If fould loose soldered, resodler that point by applying a little more solder. If it d not help you check the remote control for its infrared emission. You can get all details about how to repair and chec the remote control by entering the folloing blog site.[electronicshelponline[dot]blogsopt[dot]complease insert dots in place of [dot]s mentioned above, and google for it. Will display a site named "Electro-Help". You can see details here.

It could be one of several things:

• Dirty disc. Clean with outward strokes with a paper towel and water or Windex if needed
• Dead DVD player
• DVD may be for a region that your player does not support.
• If the DVD is burned (home made), sometimes players are not forgiving and not all will play burned discs.

no abre el dvd. que hago??????????????

Has anyone figured out what the problem is with the ? when you try and play a dvd? It's not a dirty or burned disc. Every disc i use puts the ? on the dvd. Is this tv just junk. Mine only worked for about three months and this started to happen.

you have the hardest to find code for any tv my company has seen in 27 years the manufacture of these tvs have never released the code as have all other master tv companys my best advice is to purchase a really good brand programable remote as with a unit we recommend to our clients has 8000 codes and has never failed to detect a device. as with the cheaper remotes they have around 200 codes if your paying around $ 50 for it then it should have the backing code that will insept the correct inputs


best of luck

This is their secrect codes,could be anythings.Make sure get it from them,if they don't remenber it the TV/DVD combo will not work correctly or lock u out completey.Return this unit to the owner,get ur money back.

the speaker to the disney series of tv are 1 on the right hand side


merry christmas


need more help please feel free to ask

It means that your power supply is not supplying power to the modules of the TV & needs repair.

You can make sure that your RCA composite cables are plugged in well (red, yellow, white). Since you can't see the video, the problem is probably with the yellow cable. If that doesn't fix anything, make sure that it is on the right channel. It will probably be channel 3 or 4.

I assume this TV has no Audio In and Video In, from your Cable box there's an antenna out or cable out, connect that to your TV's antenna in, and make sure that your TV is tuned in to channel 3 or 4, try those two channels. You can only change channel thru your box, your TV channel is alway's on channel 3 or 4.