20 Most Recent Juki DDL-8300 - Page 5 Questions & Answers

I just bought the same machine and mine came with a photocopied manual. There is indeed a bobbin winder on the side, there's a flat section on the side of the bobbin winder closest to you, if you push that forward it connects a wheel attached to a bobbin spoke, to the belt that runs between the machine and the motor. To wind the bobbin, put the bobbin on sideways onto the axis of the wheel that is on the inside of the machine, and push the bobbin winder forward.

Email me and I will attach instructions [email protected]

the timing of your sewing machine is, check your bobbin in right position, quit tightin the tension, and the timing for tiches is just always # 1.5

Regular sewing machine needles. Choose the needle type and size according to the type fabric or thread being used.

http://www.euronotions.com/pdf/Schmetz_Sales_Guide.pdf

i was able to find it at www.ifixmachines.com

yes you can change with other new style motor for your machine .can ask how at .
[email protected]

please go to www.juki.com.jp under industerial sewing machine you can found instruction manual or try to sending email t [email protected] i will send it to you free
best regards

PLEASE TELLME MACHINEMODEL I WILL TRY TO HELP
MY EMAIL IS [email protected]
best regards

Here you go.

https://www.sew4less.com/product/3197/Juki_DDL8500_Instruction_Manual

Good luck

The indent is called the scarf.

The scarf will be at the 3 o'clock position and, if you look closely, you will see the hook pass the needle at the scarf.

Www.ifixmachine.com has lots of manuals and parts for a cheaper price

Hi I hope this helps. These are United States contacts. Thank's, Jeff http://www.juki.com/contacts.html

It's actually designed that way on purpose so you can wind a bobbin while sewing. If you lift the presser foot, at least it'll make less noise in the process.

you should try adjusting the needle hight, the tensioners, the bobbin rension, belt tensions.

Hi!

Is the bobbin case pushed all the way in?
The upper thread could be tangled.
Remove the thread completely from the machine.
The correct size spool cap should be used for the size of the thread spool.
Re-thread the machine according to the directions in the manual.
You probably need to insert a new needle.

Dear Rosemarie,

Make sure you have threaded the machine from right to left, it sounds like the needle thread is trapped under the lower looper thread and cannot form a stitch.........start the threading over from scratch like this:

1. Lower Looper
2. Upper Looper
3. Left Needle
4. Right Needle

Is there a diagram for how to thread on the inside of the door ?

Follow that slowly and carefully to make sure you have not missed any thread guides on the way, as each one needs to be followed through to ensure correct tension and thread progression.

Cheerup and Be Happy always

Errors are listed in the Engineer's Service Manual https://www.manualslib.com/manual/1071191/Juki-Ams-210e-Series.html?page=203 More here https://www.google.com/search?q=Juki+AMS+210B+Sewing+Machine.+It+crashes+with+Error+1 ..