20 Most Recent
Xerox Phaser 3200MFP/N Laser Printer - Page 4 Questions & Answers
It suddenly went offline after printing a
Turn off the SNMP option in the TCP/IP printer port Properties
Right-click the printer, select properties
Select port tab, highlight port, click Configure Port
UnCheck SNMP status Enabled.
This fix was given to me from Xerox Tech support.
Phaser 3200 mfp laser printer leaves streaks on
One of two things.
If the streak is a line. No visible print in the streak, Then most likely the drun cleaning blade is bad and the drum unit will have to be replaced.
If the streaks are sort of reprint. a faint reprint of what is already on the page, then you need to replace the fuser.
Says pc print pending how to cancel the pending
There should be a cancel job **** or a "cancel" button on the printer. Just click that a couple times to remove it.
You can also go into control panel - Printers and Faxes - select the specific printer - manually delete your last print job.
Hope this helps!
Priner problem
This is likely to be a dirty lens on the laser unit in the base of the printer.
Dark copies from platen glass
if the problem is just from the glass , you have a bad CCD sensor or bad board in the scanner bar. and in that case u must take the printer for service.
sorry
Fosg2000
Keeps off line even ping works
Have you installed or changed firewall settings?
Have you added anything to the network that somehow has the same IP address?
Xerox phaser 3200 MFP paper jam remove &
There is a sensor in the upper portion of the paper feeder, its above the paper in the tray, it falls out of the mounting.
Easiest way to get to it is take your print cartridge out and lay the machine on its side, it is under the metal plate. I am sure it has come out of its mounting slots.
Xerox phaser 3200mfp
We are able
Get a older phone and hook it up. Try to call that number and see if you get though. My guess would be this is a prefix error (not putting a 1 in front of the area code, ect.)
Fax wants to pick up voice calls.
Xerox has what they call a feature that is called Fax priority.
It means no matter what, it will ALWAYS prioritize an incoming fax
Believe me, I have fought this one several times. Xerox Engineering has told me that is how it is designed, to make sure you get your fax.
There is nothing you can do about that except get a dedicated fax line .It is called Fax priority. and you can not over ride it.
After one print, it goes Offline
Turn off the SNMP option in the TCP/IP printer port Properties
Right-click the printer, select properties
Select port tab, highlight port, click Configure Port
UnCheck SNMP status Enabled.
This fix was given to me from Xerox Tech support.
Good luck
Phaser 3200 only printing code, not actual document
Try downloading and installing a PCL language driver from the Xerox.com site for the phaser 3200. It looks like that could be a PostScript issue. Installing the right driver is very important anyway. If that does not help, try and copy paste the document in a new document and save first as the old document could be corrupted. If this does not help either lemme know and I think of something else.
Not finding what you are looking for?