20 Most Recent Gigabyte GA-945GCMX-S2 Motherboard - Page 4 Questions & Answers

most likely bad memory or bad video card but most likely memory

Hi,

As per the specification you can only use Dual Channel DDR2 667.

Please check the link below;

http://www.gigabyte.com/search/search.aspx?kw=GA-945GCMX-S2

Rashish

Everything you need is here:

http://www.gigabyte.com/products/product-page.aspx?pid=2521&dl=1#ov

Hello

unfortunately you do not specify what the question is. Please be more specific.

Kind regards
Andrea

Hello Sir,

You can download any drivers from the link that I have provided

Link

http://www.gigabyte.com/products/product-page.aspx?pid=2521&dl=1#driver

You can download the drivers from Gigabyte WEB support site. Please click on this link and select your model motherboard and drivers you require :-
http://www.gigabyte.com.tw/support-downloads/support-downloads.aspx

click here and download the drivers as per your OS.

Please mark the problem as solved when you succeed.

Click Here for the link of drivers for Gigabyte GA-945GCMX-S2 you can also download other drivers for your motherboard (LAN,Audio,Chipset)

For Nvidia Drivers Click Here

well if you are going to open a computer workshop, you wont be requiring much of Hardware, however if you are going to open a showroom , you might have to invest much

For workshop you just need some extra generic perepherals that you can easly get from either Ranchi or Kolkata.

Just make sure you keep some DDD and DDR2 RAM , SMPS , Some IDE and SATA cables, HDD , Mouse and Keyboards

Rest other hardwares you can always order as and when required

I have an emachine t5026 that won't turn on. It sounds like a car tying to start and the lights on the front flash as does the light on the mouse, but it won't start

Here is a link you need to download the audio device.http://www.gigabyte.us/Support/Motherboard/Driver_Model.aspx?ProductID=2521&ost=xp

Please rate.

can you change to English?

:)..
1.) unplug
2.) remove graphics card
3.) remove rams
4.) remove battery
5.) flash board.
6.) press and hold power button for 3 seconds
7.) replace battery, rams and card

Turn em on!!

hi, check all the wiring of your pc unplug power supp then replug if persist try another power supply

i know sawa infotech they are very good.i think you are the same person who had locked his engineer.and than they had to call police to solve it.you have taken new board from them and you have paid half the amount.madam why are you trouble ing pepole.first get your self checked.

Hello khems71, hi your PC problem is caused by a faulty power supply box, or worst you motherboard, buy try first to replace your Power Supply box, DOUBLE Check also your connections on your motherboard.

Hi shreepad,

Those sound like you have a bad memory chip DRAM or it may not be seated correctly. The beep code of 1 long beep, also indicates a bad memory chip. If you have two or more, take one out and until you find the one that's bad. Then replace it.

Good Luck

Mark

Basic drivers for Intel 945GC chipset can be found here, just select your OS:
http://downloadcenter.intel.com/Default.aspx?&lang=eng

though itz unclear to me of wat os u r using..
assuming that u r using win xp pro sp2..n directx installed..
howevr, download microsoft kb888111 update n install it..u need to re-install or update the device driver (may b manually)..logon to internet n seek the package/audio driver..along wid the company, there will b a list of such site n driver download links if u search by the model name on a search engine like google..
download them onto a location; if the driver is in a zip format, unzip it,if itz in .exe form, just run it; if done manually it'll ask for the correct driver and location; relocate the path and a .inf file (wat it'll ask for)....goto the device manager n verify, if installed properly..!!
also download n install k-lite mega codec pack....

if not fixed try using a standby pci snd card..
but always better to consult ur system admin/vendor..!!

Hi,
Four long beeps indicates a RAM (memory) problem.
Take out the system memory, clean the brass pins and the RAM slots with a clean, dry, soft paintbrush then reseat the memory.
If it still won't boot up the RAM may need to be replaced.



Regards.