20 Most Recent Lenovo 3000 Y410 Laptop - Page 2 Questions & Answers

Have you tried an external mouse to ensure that the pointer works? Usually these problems are due to either a defective pad driver or a history of a spilled liquid contaminating of the contacts, or a settings issue (i.e. touchpad is turned off). Hve you trued any of these obvious problem areas? Please provide a few more details such as Win OS version, TouchPad driver version, etc.

When systems power off suddenly, always suspect - the power first. I would then look at heat and physical connections next as culprits. Memory errors almost always show up as blue screens.
I say try a new power supply and see what it does. Its not a lot of money either way.

Run CPUID Hardware Monitor and watch your temps. You will have to turn logging on or you will lose the data in a crash.
Make sure your CPU heatsink is still connected properly. Things have a way of working loose.

http://www.notebooks-driver.com/notebook-driver/r_19_1.shtml


http://www.notebookera.com/notebook-drivers/r_19_1.shtml

The keyboard is slowly dying. Try and clean the keyboard off with a Q-Tip and some rubbing alcohol, or purchase a new keyboard online for your exact model and install it.

Connect DVR to what?

I'm sorry to say but it may be that your DVD has died

Hi Aisuanu_aisu,

If you're having problem with the system's camera it is due to the OS upgrade. Upgrading to a different OS will wipe out all files and drivers if the method that was used is clean re-installation. You can resolved the issue by reinstalling the camera driver. If you're still looking for instructions on how to activate the camera please follow the steps below.

1. Try to download the camera driver here:

2. Once in the support download site, please go to the camera section.

3. Please make sure to download the driver that matches your operating system.

4. Now click on I agree then save the .exe file to your desktop.

5. After downloading, install the .exe file then restart your computer.

6. After restarting, press the FN+ESC button to activate the camera.

Hope it helps.

Thank you for using FixYa.

Take the battery out, plug in the charger and see if the laptop works. If it works, the battery may be the problem. Check the AC Adapter Check to make sure the adapter is plugged securely into the wall outlet, connected firmly to the adapter box and to the back of your laptop. Most AC adapters have a little light in themon that rectangular box in the middle of the cord that lights up when it's getting electricity. If that light isn't on, try a different outlet. Check your fuse or circuit breaker box and plug a different device into that outlet to make sure there is power to it. If it still does not light up, your adapter could need replacing. Also check the adapter box for signs of warmth, as it will generate heat when it's plugged in. No heat means no power. Remove the Battery Sometimes it's as simple as a seated battery. Remove the battery entirely and clean out any dust, lint or hair that may be clogging the connectors and preventing a proper connection. Reseat the battery securely and make sure the little locking pins that hold your battery in place are securely fastened and there is no movement. Fix a Broken Laptop Charger If your laptop charger seems broken, it's most likely because the battery will not charge. You plug in the cord, the lights come on, but the charging light doesn't change or blinks repeatedly. When you remove the power cord, the laptop shuts off instantly due to the depleted battery. There's more than one cause for this, and it's not always a broken charger. Check the connection between the charger and the laptop. It should fit firmly in the DC jack without wiggling. If it is loose, use electrical tape to hold it in place so the charger can receive power. This is a temporary fix, however, because a faulty connection can create sparks and cause a fire or injury. A loose connection will just get worse over time, so have it sent to a DC jack specialist as soon as possible. Turn off the laptop and flip it upside down. Locate the latch that secures the battery and slide open. The battery should pop out; give it a tug if it doesn't. Apply a small amount of rubbing alcohol (Methylated Spirits)to the tip of a cotton swab and use it to clean the battery's connectors. Dirt can build up and interfere with the connection, giving the appearance of a broken charger. Let the alcohol dry completely and re-insert the battery. Slide the latch to secure it and plug in the power cord to test it. See if the laptop powers on with the charger only and battery removed. If it does, the battery is the likely culprit and should be replaced. If the charger is truly broken, the only thing to do is to replace it or the power cord attached to it. Look on the bottom and write down the part number. Call the laptop manufacturer for a replacement charger or search for the part number on eBay. If you purchase from anyone other than the original manufacturer, ask for genuine parts to reduce the possibility of problems. TroubleshootMag Safe adaptors http://support.apple.com/kb/ts1713

Go to BIOS and check if the screen will shake in there if not try to uninstall and re-install the video driver that you have. If the screen is also shaking in BIOS it means there is something wrong with your video card.

try this website Its dedicated website for apsswrod unlockinghttp://www.forgotcomputerpassword.com/

how to unlock keyboard of lenovo win7pc?

what kind of problem u actually facing...icon activated means ?address bar activated means ?

Press the Fn+Esc key to turn it on. Windows will automatically install the USB drivers.

Download product keyfinder from the internet and run the software u will be able to see the installed product key

try this link for the drivers

it might be the problem is on the button itself, maybe due to several pressing the button,

sometimes system might go wrong. please long press the power button until the computer shutdown. then turn it again. it works most probably.