20 Most Recent Onkyo TX-SR705 Receiver - Page 3 Questions & Answers


Short answer. No.

If you have one, use it. Is there a problem, like wanting to integrate 901's into your 7.1 system?

Get a separate amp for the 901's and check Fixya for the dozens of solutions I have posted regarding how to do it.

Onkyo TX-SR705... | Answered on Dec 06, 2009


hi...
The Turntable will need a phono pre-amp before you connect to the Onkyo.
Not sure about the 901's

Onkyo TX-SR705... | Answered on Nov 30, 2009


I'm not sure that receiver is compatible with outboard EQs like the 901 EQ. This receiver is also not on Bose's 901 EQ compatibility chart, so it's possible that this is not going to work at all. You could call Pioneer and ask if this receiver is compatible with ANY outboard gear (such as EQs, compressors etc) but I don't think it is.. The tape in/ tape out I think is only for 1 source.. That's the problem with new receivers, they expect that nobody will want to connect any external gear (like back in the day) because everything is built in.

Onkyo TX-SR705... | Answered on Nov 30, 2009


you must go into the receiver menu and direct the signal to come from there to the input you are using

Onkyo TX-SR705... | Answered on Nov 04, 2009


The regulator is bad.

Onkyo TX-SR705... | Answered on Oct 20, 2009


TRY 0573


Samsung seem to have used this for just about all theri TV's Video pLayers and DVD players. Totally standard thinking!

Please rate our help++++Thanks for using FIXYA




Onkyo TX-SR705... | Answered on Oct 11, 2009


More than likely you connected it to the Speaker B terminals in the rear of your receiver. Look for a button or switch on the front and change to either Speaker B for outside only or A&B for indoors and outdoors.

Onkyo TX-SR705... | Answered on Sep 08, 2009


Go to the menu and choose hardware setup and then change the Surr/Zone2 to be Zone2

Onkyo TX-SR705... | Answered on Aug 29, 2009


tou may want to hook this to speaker select switch

Onkyo TX-SR705... | Answered on Aug 28, 2009


If you have a Home Theater Line conditioner on this receiver, not a power surge protector, even a "Monster" surge suppressor, your problem Is AC related. For troubleshooting; first if your AC power cord is three pronged, go to Lowes, Home Depot, etc. and get a three prong to two prong adapter. Your problem is a "Ground" issue, however it may not be from the receiver, it could be "Anything else" in your home. Even an actual outlet with a loose wire. It can be very very time consuming to "hunt down". An adapter will take the rest of the house out of the picture. Disconnect all other input sources like Cable, DVD, etc. then turn the unit back on. If you still have a humm, yes the problem is internal and needs serviced. If it stops, re-connect one item at a time until the noise re-appears and you have your culpret. If you don't have a line conditioning noise eliminating Theater surge protection unit; Get one! best few hundred bucks you could ever spend. It will protect all your electronics and could save you thousands! Panamax, Furman, Monster, are your top 3. If you still have issues, post a comment and I can help you further. Hope this helps.

Onkyo TX-SR705... | Answered on Aug 23, 2009


When attempting to increase the volumn on the television either using the remote of turning the reciever knob by hand the volumn increases dramatically. I am concerned the speakers might blow. Does anyone know how what the problem might be.

Onkyo TX-SR705... | Answered on Aug 21, 2009


If you are still covered by the warrenty, then you may be able to get it fixed at no cost.

Otherwise get a qualified technician (I say this to cover my but rather than suggesting that you open it up yourself) to open it up and check the fuses inside.

Onkyo TX-SR705... | Answered on Aug 17, 2009


Try to use the control panel switch to turn on. Or maybe your remote battery need a new one.

Onkyo TX-SR705... | Answered on Jul 26, 2009


Hi
I guess when you say database thats what you mean and not schema . the terms of database and schema are different from one db to another .
Usually you don't create database from vb or other language, although i guess you can do that .
follow the commnds in the folowing link you just have to embed them in your vb code .

good luck


Onkyo TX-SR705... | Answered on Jul 18, 2009


The best bang for your buck is the Denon Avr999 or if you need a cheaper one the avr589, I have both and they rattle the windows

Onkyo TX-SR705... | Answered on Jul 10, 2009


if what Dark_Orbit said does not work try doing a master reset by ressing and holding the dvr/vcr button and stand by button simultaneously. This would erase all your assignments so you would need to reassign all your sources hooked up to your onkyo.

Onkyo TX-SR705... | Answered on Jul 06, 2009


HDMI requires a digital encoder circuit to output the digital signal, that was most likely was damaged by the surge, have the receiver repaired. also contact the power company, they have a form u can fill out for reimbursement for repair costs due to power surges, also install a surge protector.

Onkyo TX-SR705... | Answered on Jun 19, 2009

Not finding what you are looking for?
Onkyo TX-SR705 Receiver Logo

105 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Onkyo Audio Players & Recorders Experts

Ted28

Level 1 Expert

5 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Onkyo Audio Players & Recorders

  • Onkyo Audio Players & Recorders

Most Popular Question

wired our new home

  • Audio Players & Recorders
Loading...