20 Most Recent Frigidaire GLTF1240A Front Load Washer - Page 5 Questions & Answers


The error code E90 is just a group error code. It is indicating a communication error between the two boards in your machine. It does not indicate where the problem may be. A power glitch may have caused the E90 error code or a loose connection.
https://www.appliancepartspros.com/answers-for-frigidaire-control-electrical-137006000-ap4358809-question-70945.html

Frigidaire... | Answered on Feb 12, 2019


F03 is heating element circuit issue and PAU is drive motor power interruption.

I would imagine the F03 could be cause by the same power issue that effects a PAU.

The list of PAU probable cause is;

Control board
Door switch
Thermal limiter
Motor problems

I see one common denominator; the thermal limit.

Frigidaire... | Answered on Feb 08, 2019


The dispenser may be clogged with softener residue which will have to be removed before normal dispensing can resume.

Frigidaire... | Answered on Jan 27, 2019


INLET VALVE MIGHT BE LEAKING PAST . WITHOUT BEING THERE TO CHECK NO ONE CAN REALLY TELL YOU

Frigidaire... | Answered on Jan 24, 2019


It's either the control panel, or the spin speed sensor (if there is one). Only someone with a multimeter will be able to tell for sure.

Frigidaire... | Answered on Jan 21, 2019


Have you checked the drive belt and the motor brushes? Also check if there is voltage getting to the motor. Does then drum fill with water, and carry out the wash cycle fully but without the drum moving? If so it is likely to be either the motor, brushes, belt or relay pcb

Frigidaire... | Answered on Jan 19, 2019


Have you checked the drive belt and the motor brushes? Also checknifnthere is voltage getting to the motor. Does then drum fill with water, and carry out the wash cycle fully but without the drum moving? If so it is likely to be either the motor, brushes, belt or relay pcb

Frigidaire... | Answered on Jan 19, 2019


Did you remove the locking bolts from the back of the drum? If you did and it's a new machine, contact he retailer for warranty. If not, probably the belt shot loose from the drum and it means you have to disassemble the entire machine to fix it.

Frigidaire... | Answered on Jan 15, 2019


Sounds like the brushes to me they are on the motor if worn the motor won’t turn

Frigidaire... | Answered on Jan 14, 2019


SO WHAT OF IT . CALL A LOCAL REPAIR SERVICE

Frigidaire... | Answered on Dec 31, 2018

Not finding what you are looking for?
Frigidaire GLTF1240A Front Load Washer Logo

53 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

J. Bradshaw

Level 2 Expert

121 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frigidaire Washing Machines

  • Frigidaire Washing Machines

Most Popular Question

fills water nothing

  • Washing Machines
Loading...