20 Most Recent Frigidaire GLTF1240A Front Load Washer - Page 4 Questions & Answers

Question edited for clarity and translated into written English :>D I think they are belt driven. It needs replacing. It is the same as the fan belt on your car, they stretch, wear and slip. Or is has a clutch? google make model parts https://www.google.com/search?q=%22frigidaire+twin+tub%22+washing+machine+belt+replacement ..

https://www.appliancepartspros.com/search.aspx?model=met1041zas2

damaged drum --bracket --motor

'power strip'!! You can't run a washing machine from a power strip! It pulls far to many amps. Plug into a wall socket on its own. PAU Error. The PAU, or pause, error usually means that the washing machine cycle was interrupted and was not restarted properly. If you try to modify the cycle or start a new one before the first cycle is complete, the PAU error will appear on the display.

My Frigidaire Affinity Has a Pause Error ' Hunker

https://www.google.com/search?q=Frigidaire+Affinity+washer+PAU+code

..

Suspect the cycle timer

possible bad bearing on drum

https://www.searspartsdirect.com/diy/symptom/dryer-repair/1234594/door-won-t-stay-shut/dryel07

It looks like there isn't a way. you could phone them and ask? https://www.frigidaire.com/Owner-Center/Contact-Us/ https://www.google.com/search?q=Frigidaire+FFCD2413US4A.+change+Default+Wash ..

The water must be connected to both inputs if it has both hot and cold fill.

Question edited for clarity 'make model (what it is). Question moved to Frigidaire Washing Machine. This is the Transmission unit, which I would say puts it beyond economical repair. Frigidaire H Transmission #WCI-134735700 List Price: $765.13 Sale Price: $637.61 On first reading, I thought it sounded like the pump, but then no agitation, but it spins. This makes it sound like the control board. In view of the confusing actions and the cost involved, I would call out a Service Engineer. https://www.partswarehouse.com/Frigidaire-FEX831FS2-Washer-Dryer-Combo-s/70205.htm ..

Check the filter and pump for obstructions.

For that many issues and for the amount of money you spent, you need to call out a technician who knows this machine. Sometimes, you just have to let the pros take over. Burnt cables is never a good sign as it can take everything with it.

I had the hardest time getting the old filter out...nothing worked for me; it wasn't frozen with ice as one video suggested, it was just physically stuck. Pressing in I couldn't get the rear latch mechanism to let it go. (even after removing the housing) I ended up: 1) turn off water pressure (maybe this helped some?) 2) removed the 4 screws holding the mounting mechanism to be able to get to the latch that holds the "rooster comb" of the filter. 3) took a hemostat and moved up the latch while pressing the filter in (a bit tough now that bracket wasn't mounted, so nothing to push against 4) it finally came out. One of the plastic clips on the "rooster comb" actually broke on the filter side, it was likely jambed so I couldn't remove the filter. The replacement filter doesn't have the full "rooster comb" instead just one piece of the "comb" but it seems to hold in place fine, maybe will make it easier to remove (didn't want to tempt fate trying to remove it after I got it in place). So...I'll try buying a filter that has just one piece comb. Also, the one that stuck had this comb on a slide mechanism that goes up and down (relative to top/bottom of refrigerator) but the replacement has it fixed with no slide...it could be that the slide movement actually contributed to it being stuck, since the mounting plate in the refrigerator also slides up/down in same direction (not sure why 2 pieces both slide, maybe if spring in mounting plate were stronger it would work better but in lieu of changing out the $40 mounting plate, I'll see if this "one piece" comb allows it to be removed with less fuss.

GOOGLE IT ONCE

All front loading washers will fill and drain multiple times before it finishes. Unlike a top loader, a front loading washer will take longer to run because there is no agitator and will fill with water and drain multiple times. A front loader is more energy efficient than a Traditional top loading washing machine. A washer dryer combo will take hours to complete a cycle.

The problem is with the electronic board of the device and you have to repair or replace it.

Clean the filter

There are a couple of videos and text based articles in the link, plus disassembly. I would check connection on the control board connections and those on the lid lock. The lock has to be functioning properly to operate. https://www.google.com/search?q=Frigidaire+FFLE3911QW0+combo+washer%2Fdryer+is+starting+and+locking ..