20 Most Recent
Tomtom One XL GPS Receiver - Page 8 Questions & Answers
Satnav fell of the window mounting and won't
Try the factory reset option, If you looke around where the docking connector is on the bottom you should see a tiny hole that you will be able to push a pin into. This will activate the hard reset option and hopefully will bring your TomTom back to life.
Many thanks for using FixYa
Unit is one year old. Worked fine this morning,
try this originally posted by gt3rs i just did it and it worked for me
Here is a solution that worked in my case (constant reboots after voice select)
- Plug your tomtom into your PC.
- Run TomTom Home
- Select the option to run your TomTom through your PC (TT Home)
- You should be greated with the select language screen
- Then simply select language etc.
- When you get to the voice selection: select a voice (here TTHome should freeze) <- also strangely enough notice the cancel button doesn't on the screen (as it does when doing this on the device)
- Don't panic TT Home should start working again in a few seconds
- Disconnect your TomTom and that should have solved the problem, the normal map screen should show up upon starting up your TomTom
This solved the issue for me, hope it does for you good luck!
Green lite will not on . when unit is pluged in
press reset+power for 20 seconds, then release reset ank keep pressing power, it will turn on for 10-20 secs, in this time you must connect it to the pc. run tomtom home and make the upgrades that the program sais. must help.
Tom tom is stuck on
1. open your tomtom as a folder 2. copy all info from tt to a new folder on your computer 3. format tt in fat32 4. download tomtom home and run it 5. make all upgrades that the tthome sais 6. copy the folders with maps and voices from saved ones 7. if restarts or freeze on logo, open tt as folder and delete the file MapSettings.cfg from map folder 8. say thank you
I tried to update my
you should download a new one, for your region, to change it and put in the navigator. and, for the future, every time before you make some changes, save all the content in one folder on your pc.
My tomtom is free it
1. open your tomtom as a folder 2. copy all info from tt to a new folder on your computer 3. format tt in fat32 4. download tomtom home and run it 5. make all upgrades that the tthome sais 6. copy the folders with maps and voices from saved ones 7. if restarts or freeze on logo, open tt as folder and delete the file MapSettings.cfg from map folder 8. say thank you
My tomtom has a red
1. open your tomtom as a folder
2. copy all info from tt to a new folder on your computer
3. format tt in fat32
4. download tomtom home and run it
5. make all upgrades that the tthome sais
6. copy the folders with maps and voices from saved ones
7. if restarts or freeze on logo, open tt as folder and delete the file MapSettings.cfg from map folder
8. say thank you
NO GPS SIGNAL
The problem can be fixed by resetting the tomtom one xl gps receiver. Tomtom one xl gps receiver is common with this problem, after resetting it, it is most likely it will happen again. So be ready to keep resetting over time.
It most like is as a result of bad strength to search and detect the satellite. So you have to adjust the antenna also to a area where it can pick signals easily. This is quite uneasy because the areas to locate the satellite varies in terms of the location you are.
Software update will not fix this problem as well as the quickgpsfix, so the bes solution is for you to keep resetting it.
Hope this info helped.
I don't have signal
hello there firstly there are two solutions for this problem ,reset the receiver ,and calibrate it ,get an external antenna this might just fix the problem goodluck
Tom tom xl2 wont let
you will need an updated post code file that allows 7 digit post codes (if your in the uk)
http://www.tomtom.com/updates/great_britainpostal_all.zip
Just download that file then extract the files ,plug in your tomtom to your pc, open up the tomtom device in my computer(XP) or computer(Vista/Windows 7) and copy the extracted files into the zip folder, then unplug the device and you will be able to enter full postcodes
Not finding what you are looking for?