20 Most Recent Toshiba REGZA 47HL167 TV - Page 3 Questions & Answers

Check the speaker/s first. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

check on Ebay or Craigslist.

First if a "new" set and if in warranty--have them deal with the problem.If nothing on remote except on and off works--it is a micro problem (microprocessor) in the set.I assume you did unplug the set---wait and plug it back as that could allow the micro to reset.The key clue here is nothing on remote works except on/off?

Try by update the EDID. Contact any service technician. Gopakumar Gopalan Google

http://www.searspartsdirect.com/partsdirect/user-manuals/15515/47hl167-toshiba-parts-tv+lcd-manual Try this link to download it.

The roku has video output in two ways, try the other outputs to see if it works with those.

If you can find a piece of stiff wire, put a small 90 degree bend onto one end and try to hook the edge or middle of the DVD drawer and pull out the drawer. It will resist a bit but should come out.

These blinks [Flashes] are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/. If the blinks continues, and non-stop, the fault should be with its main system control IC, and with the memory IC.

To disassemble it, you have to see some illustrations. If you wish to get more details about how to disassemble Toshiba TV, check this link. http://electronicshelponline.blogspot.com/ Pull up older posts there. Disassemble procedure to many TVs are given in detail, with illustrations.

short in the power board. have a tv technician look at it.