Toshiba e-Studio DP170F Plain Paper Laser Fax - Answered Questions & Fixed issues
Toshiba 170
Toshiba e-170F does not support distinctive ring, you need an external message controller, to rout the signals, normal ring to phone, distinctive ring to the e-170F.
What does NG mean on Toshiba fax?
It's simply "No Good", transmission is not completed, due to the receiving line is not available or busy, possible you do not have an active line, and you have plug the phone line to the wrong port (plug to line port not the phone/headset port).
When I get the warning for the drum reset on our
This is an advance reminder for you to order a new drum, you do not have to replace it until it asks to do so. A drum unit is rated for 20,000 pages (5% coverage), it depends on your usage, if there lots of graphics of dark color, you have to replace it before it expires. You can reset it, if there is no quality issues. Procedures:[x]-key to press, {{
Display on the LCD}}[Menu], [5], {{
5 Default setting}};[2], {{
2 Scanner & Printer}};[0], [4], {{
04 Reset drum counter,
1=Yes, 2=No}};[1] {{
Reset Drum Counter, are you sure?}};[Enter].
FYI: I would recommend that you put a label "Drum reset" on the drum unit, remind yourself, that you must replace it, once you have a quality issue.
Drum life warning on toshiba dp120f
reset drum Counter for DP120Turn fax off. Hold down 0, 1, 3 on numeric key pad and turn fax on. Then release the 0, 1 & 3 and enter the number 80, wait a few seconds and should see a message confirming counter has been cleared. Then turn fax off and on again
I am getting a "Drum Warning
Hi:
Follow this procedure. Press Menu key, then press these number keys 5 2 0 4 then press the down arrow key then press enter twice then press the stop key. This will clear the drum warnig and reset the drum counter.
Andrew
Estudio170F Device error 42
Hi:A device error 42 is pointing at the laser giving a problem. If shutting off and turning on the fax does not clear the problem then a tech will need to look at it.Andrew
Error h4
H4 in 161, fuser low temp.; instantly solve it by simulation (c-auto-c-auto) 14; check thermistor; check fuser lamp by 5-02. it is to blink!
HOW TO COONECT WITH MY PC
first check your operating system compatibility to your toshiba operating system list,then load the disc driver to install the driver for your toshiba printer,then upload its driver and follow the instruction appears on the monitor...it's easy to install its driver its just like you install the common printer....
Status NG BO
POWER OFF THE MACHINE PRESS 1 3 *(star) together. switch on machine while holding this three sw.
machine will rest.
Can't set to print transmission report only on error
Hi:
Press the menu key and the down arrow key to get to the lists menu. Press enter . Press the down arrow key until you get to the menu list and press enter to print it. You need to go to Reports and Lists which I believe is under Machine settings. Reports and Lists is where you need to make the change from always to on error only.
Good Luck
Andrew
Drum Warning
Unfortunaely , I wish I could help you, see the drumn reset needs to be done by a technician in the FAX world if your in ct i could help if not call Toshiba or us and we can help
Toshiba Super G3, e-Studio 170F
Fax display screen always reads, "Auto receive". When attempting to
fax, the busy light flashes. Busy light stops flashing for 30 seconds,
then starts flashing again.
Above is the default settings for the fax.
NGB0 indicates signal error or line condition error.
U need to check the phone line. U can hook any single line phone to the phone line, check for tones without background noise.
Not finding what you are looking for?