20 Most Recent
Toshiba e-Studio DP170F Plain Paper Laser Fax - Page 9 Questions & Answers
TOSHIBA E-STUDIO 347CSL how i make it work without toner chip
You can't. It is made that way. You can reprogram the chip if you can find the machine and the software to do it. Everything is done to make you use OEM original toner cartridges, which are better quality, more reliable and made especially for your machine.
Toshiba e-studio 3008 show f101 call for service error 13 . How can i solve it?
1. Turn the power of the equipment OFF and check the
connection of the HDD.
- Connector and harness check
- Check if the connector pins of the HDD are bent.
- Check if HDD for other equipment is not installed.
- Check if SRAM for other equipment is not installed.
2. If the error still occurs after step 1, perform the following.
- HS-75 File System Recovery mode ? Recovery F/S ? /
imagedata, and then restart the equipment.
- Perform FS-FAX ? 11 FAX CLEAR MODE ? [CUSTOM
INITIALZE] ? [CLEAR DATA], and then restart the
equipment.
3. If the error persists after step 2, perform the following.
- Perform HS-73 Firmware Assist mode ? Format HDD, and
then install "System Software (HD data)" with HS-49
Firmware Update mode.
Notes:
The following items will be deleted by performing HS-73
Firmware Assist mode ? Format HDD.
• Message Log
• Job Log
• Spool Data (Print, Email reception)
• Template
4. If the error persists even after step 3, perform the following and
then reattempt step 3.
- HS-74 HDD Assist mode ? Revert Factory Initial Status
HDD.
5. If the error persists even after step 4, replace the HDD.
6. If the error persists even after step 5, replace the HDD
harness.
7. If the error persists even after step 6, replace the SYS board.
How solved my toshiba estudio452 error cod f110?
[F110] Communication error between system CPU and scanner CPU
[F111] Scanner response abnormality
(1) Check if the harness connecting the SYS board and SLG board is disconnected or open circuited.
(2) Check the version of the system ROM on the SYS board.
(3) Check the version of the scanner ROM version on the SLG board.
(4) Replace the SYS board.
(5) Replace the SLG board.
I'm working on a Toshiba c281 I need to know how to remove the drum.
1. Open the front cover
2. Remove waste toner box
3. Remove developer unit
4. Put down the power switch actuator
5. Remove screws (2 special screws can only be loosen) and pull out the process unit
6. Separate the transfer belt from the process unit
7. Remove the main charger unit and u can change the drum
How to reset admin and system password of toshiba estudio 2518?
- Turn off the power switch.
- Hold then Press "0 & 8" while turning it on.
- You Will Be in Test Mode Then, then press the "263" and "start" button.
- You will see your DEFAULT PASSWORD 123456 on the screen, clear the old password and enter the new password and press the "Start" key.
- Then switch off the machine and turn it back on the power socket. You can see reset your password.
Not finding what you are looking for?