20 Most Recent
Samsung YP-T10 Digital Media Player - Page 7 Questions & Answers
Continuous Beep
i had the same problem this morning and i press a pin into the reset button hole thing at the back. then turn it on and it'll work
MAC ADDRESS
- You have to set the Mac Address value after exchange PCB Assy.
(only Bluetooth product)
1. Disassemble the YP-T10 case and Find the MAC Address. (12 digit)
2. Open “memo pad” and write Mac Address on it.
3. Save “BDADDR”
4. Connecting USB, Copy “BDADDR” into Root.
5. To confirm Bluetooth Mac Address
- Power on
- “Setting – My Device Info – View the MAC Address”
6. If an error occurs, the address of the error is saved in
the ErrorMac .txt file as text
7. Mac Address Setting is done.
Bluetooth
the problem for that is the bluetooth mac address isn't setted properly or no mac address.i would i advice to send it back to them or you cam make your own bluetooth mac address.
BTDEV_DB??
try do firmware upgrade.that one is for bluetooth
You have given me some advice on my yp-t10 bluetooth menu missing features please help me agian as i dont understand
Upgrade Methods
If the product does not power on and shows any of the following symptoms, you may try the upgrade methods
in this chapter without having to disassemble the product:
- The product does not turn on when the power switch is pressed.
- The product powers on normally but no USB connection can be made.
- The product’s icons appear garbled or malfunction.
- Files are corrupted, or the product shows as a “removable storage” in Windows but cannot be accessed.
Firmware Upgrade Method
1. Download the firmware upgrade file to a folder and decompress it.
2. Check the contents of the folder that was decompressed.
3. Connect the YP-T10 to the PC.
4. Open the Removable Disk folder of the YP-T10.
5. Select the installation file in the folder that was decompressed,
and then copy the upgrade files to the Removable Disk folder
of the YP-T10.
6. Perform “Safely Remove Hardware”, and then disconnect the
device from the PC.
7. When power on YP-T10, power off after
“Image Upgrading...”, “AUI Upgrading...”
8. Power on again. After “Font Upgrading...”,
“Image Upgrading...”, “AUI Upgrading...” set will be power
off.
9. After the upgrade, go to “Menu” → “ettings”→ “ystem”→
“Firmware” and check the version.
If the battery power is low, the upgrade will not start. In this
case, you need to connect a USB or charging cord for the
upgrade to start.
I can't find the
I just pressed the reset button on the backing of the MP3 using a small paper clip - the big ones don't work - and hold it for 30 seconds. It worked!
We Want music on the Harley!!!
I dont believe the interphone is compatible with music players. Bluetooth devices utilize various communication 'profiles' to interact vith other devices. The Blueant supports headset and handsfree profiles which are designed for connection to a mobile phone. Music devices use the A2DP (advanced audio distribution protocol) profile which is much more sophisticated than headset or handsfree. It may be possible to get music playing via a phone or pda that has a built in music player and sends its output via bluetooth using the headset profile. This is not a usual feature (the first iPhones for instance was able to do this because of a bug in their software) so you will have to test or inquire with the phone manufacturer.
Folders don't work
when you done the firmware do you also done the *.rsc..normally i do the *.rom and *.rsc files so that it will erase and replace
Stuck
if you know how to dissamble then do it.if not send to service center
SAMSUNG MISSING FEATURES HELP!
i have my own type of mp3 that t you have, when i choose my the bluetooth option i can see (version 3.06)
Stereo Headset
mobile phone
file transfer
bluetooth mode
blue setting
i dont you have problem with that,i think the only solution for that is to try to upgrade the firmware.
I need help deleting recorded files or songs from Samsung YP-T10
plug your Yp-t10 with the usb, and then go to the samsung media programme
and from there push the ETC next to the other icons on portable part , and list of files comes up. then press recorded files, press the file u want to delete and that's it
hope this helped
Not finding what you are looking for?