Top 20
Kodak 5500 ALL-IN-ONE PRINTER Questions & Answers
Office hero 6.1 will not turn off or respond.
I had same problem - just contacted Kodak live chat, they talked me through a couple of fixes which didn't work, so they ordered me a free replacement. The printer was 9 months old.
7/4/2012 3:52:27 PM •
Kodak 5500...
•
605 views • 0 helpful votes
Explain how to use the scanner
be sure that the printer is connected to the computer then if you already install the driver of it try locate the software for the scanner then you can scan anything
10/27/2011 12:34:51 AM •
Kodak 5500...
•
42 views • 0 helpful votes
I am trying to connect
To resolve the error, make sure your printer is connected to your computer either with a USB cable or through a wireless network.
If your all-in-one printer is connected through a wireless network:
- Open System Preferences.
- Open the Print & Fax from the Hardware section.
- Click the +.
- Highlight your all-in-one printer in the Bonjour list and click the Add button.
If your all-in-one printer is connected with a USB cable, the printer should be added automatically. If the error continues after connecting the USB cable, make sure:
- USB cable is connected securely to the printer and computer
- Printer is connected directly to your computer, and not through a USB hub or other device
- You are using a USB High Speed 2.0 cable and the distance between printer and computer is less than 1.8 m (6 ft).
If the error continues:
- Disconnect the USB cable from the printer and computer.
- Connect the USB cable to the back of the printer; make sure it is securely connected.
- On your computer, open System Preferences, then select Print & Fax from the Hardware section.
- Connect the other end of the USB cable to your computer.
- Monitor the Print and Fax window; when the computer detects the printer it will appear in the printer list.
- If the printer does not appear:
- Connect the USB cable to a different USB port on your computer.
- If the error continues, use a different high-speed USB 2.0 cable.
NOTE: You can test your USB cable by connecting another USB device to your computer using the USB cable.
2/15/2011 12:11:24 AM •
Kodak 5500...
•
482 views • 1 helpful votes
KODAK ESP 7 AIO
Carriage stuck
Hi,
optical encoder is known as the timing Strip film that guide the carriage of the cartridge, you have to clean softly with a cotton and alcohol.
10/30/2010 12:10:15 PM •
Kodak 5500...
•
697 views • 1 helpful votes
Having a problem with the paper loading. It is
Hello there
You may not see a paper jam.
This may work for you, it has worked for many here I given this advice so gave it a try it could work for you.
Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.
First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.
If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.
Also clean The purge unit, called a spittoon assembly in an HP, Lexmark, Caonon and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing.
That is where you'll find the print head assembly parked on top of it.
It also has an electrical pump to milk the print heads and test for ink flow.
So clean all under where the heads are parked and on IP6600D models you can take out the heads just by clipping them out, and then clean well.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
4/27/2010 4:40:47 PM •
Kodak 5500...
•
42 views • 0 helpful votes
How do u set up your kodak 5500 with your wireless
Hi,
Well First You have to be sure Your pc bluetooth enabled,
second You have to install the software comes with your printer while installing there will be an option to select what kind of interface you want to connect your printer you have to select bluetooth.
if you have installed drivers and software before try to uninstall and reinstall it
11/27/2009 9:23:26 PM •
Kodak 5500...
•
224 views • 1 helpful votes
Having Problems with Kodak AiO 5500. Our son, who
Go here. You will find everything youu need.
User guide,Setup Book, and a link to the drivers you need. All guides and other info are step by step
with pictures to guide you every step of the way.
Hope this helps
Please leave feedback
12/5/2009 6:32:15 PM •
Kodak 5500...
•
133 views • 0 helpful votes
Have new printer to install but have lost the
Follow this link to Kodak. Download and install the all -in-one software for your printer.
http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=10623/10624&product=EKN033541
11/28/2009 2:34:09 PM •
Kodak 5500...
•
45 views • 0 helpful votes
Not finding what you are looking for?
