I have a HP Deskjet F1480 that seen not to work, but when I got the cd that install it, it say F4100. Back then, whenever I print something it refer to F4100, but now I want to print something it dosen't work, why?
Check the power cable
Connect the HP Deskjet F4140 All-in-One directly to the walloutlet
Power Cycle:
Follow the steps below to power cycle your all-in-one:
1. Verify that the unit is switched on. Disconnect the USB/Ethernet cable from the All-in-One and also disconnect power cable from All-in-One and also from wall outlet.
2. Wait 30 seconds.
3. Plug in the power cable to All-in-One and also to wall outlet.
4. Check for the functionality
Reset the All-in-One:
1. Press and hold the Cancel button and then press the Start Copy Color button.
2. Release both buttons. The self-test page prints.
Now check the functionality
Posted on Jul 05, 2008
i have a hp deskjet f4180 all in one printer but i lost the cd. i need the sofware or it will not connect to print or scan please help me where can i get the sofware?
i have a hp deskjet f4185 all in one printer but i lost the cd. i need the sofware or it will not connect to print or scan please help me where can i get the sofware?
Posted on Sep 20, 2008
how to reset ink levels in hp f4185...........but not the taping over cartridge method please....i tested it on a officejet 5610 but it wont work so i hard resetted it...so...how to hard reset or some other methods to reset the ink levels?
for colored is only 3ml and the black is 8ml
Posted on Apr 28, 2010
Hi I'm having an issue and need to find out how to fix it. I'm scanning a document and unable to save file as a PDF. I've uninstalled Acrobat Reader 9 and installed version 5. I uninstalled the software for HP & re installed it again. Still nothing. The reason why I'm so frustrated is that for weeks I've been able to scan documents & save them as PDF. But last week my laptop's hard drive crashed, so I lost everything and had to reinstall everything I had prior. Now I'm having this problem. Any suggestions?
A simple solution to this problem is to scan to JPG as normal and then print the JPG to a PDF using one of the very good "print to PDF" utilities like the Cute PDF writer.
Good luck.
Posted on Jan 13, 2010
Podrian indicarme como resetear una hp F2180, cuyo boton naranja no deja de parpadear. Mi e-mail : [email protected]
Pardon my rusty Spanish:
Limpa donde corre la papel con una lata de aire, en caso se quedo un pedaso adrento la imprezza.
Secundo, limpa los reduas de rubber con alachol.
Ultimo - desenchfle lo de la pade unos 5 minutos y trata otra ves.
Posted on Dec 02, 2008
Printer goes through normal startup procedure, then goes to lights blinking. plus "Start Copy" shows "E" as well.
Hi Guys,
Please check the following link and its the same for Deskjet F4180
HP Deskjet F4210 and F4213 All-in-One Printers - Blinking Lights- c01632938
HP Deskjet F4200 All-in-One Series - Blinking Lights - c01365789
Thank You
Posted on Jan 20, 2009
I have changed the cartridges a couple of time for both colour and black cartridges but getting E message on top of the printer and flashing orange error lights for colour and black cartridges also cannot get printer online..any ideas folks..thanks..
Hi I have exactly the same problem, and can't scan or make copies. I went to HP Online, and tried their advice, which didn't work. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00867129&lc=en&dlc=en&cc=us&product=3177566&rule=25623〈=enHP's solution made me realise it might be a scanner problem. I made a wild guess and kept the cover above the glass panel open. Turn off your printer, lift the cover up and turn on again. The lights should stop blinking and you should be able to scan/copy/print. I guess the cover prohibits the device to scan properly causing the blinking lights. Hope this helps!
Posted on Aug 06, 2009
i have problem my printer hp deskjet f4185,this problem is blink light color,black/photo,resume and power button. i have try on/off printer and disconnet cable.but i have same problem, and one more problem is display at start copy like this " E ". i hope have some one can help me..
Hi Jeje,
The Printer has a fatal error. Please try the below steps, if it didn't work you have to service the printer.
Power Drain:
NVM Reset:
Regards,
Rizwan
Posted on Jan 19, 2010
about HP DESKJET F4180. it says E in the small display screen it has and and yellow lights keep blinking and does not print
Turn the printer off.
Disconnect the AC power.
Reconnect the AC power.
Turn the printer on.
Start the HP Support Tool software on your computer, and check the ink-levels on the printer -- no ink means no printing.
Do the lights blink in a specific, repeating, pattern?
Have you looked at http://support.hp.com and entered your model-number, and looked at the "common trouble-shooting" suggestions?
Posted on Apr 23, 2010
My printer is not printing out any black ink onto paper. Only the color is printing out onto paper. I put two brand new cartridges in for the black ink and color ink, and it says that the ink levels are completely full, but the black ink still will not print onto any paper. I've tried pulling out the black ink cartridges and repeating the process but it still will not print black ink.
You need to take it a couple steps further after your test print. Sounds like your print heads need cleaning or your cartridge may need aligning. It’s best to do this each time you install a new cartridge. for more information….... http://en.kioskea.net/forum/affich-40171-printer-not-printing-black
Posted on Sep 09, 2010
344 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions