Top 20
HP Deskjet F4180 All-in-One InkJet Printer Questions & Answers
When connected to power all the indicators in the printer blinks..
Turn off the Printer and Unplug it from the Power Supply. Remove the Cartridges from the Printer!!!!! On the Backside of the Cartridge you would see a Copper Stripe, Wipe the Copper Stripe using a Paper Towel! Reinsert the Cartridges and Restart the Printer. Good Luck!!!
I want to scan word
There is no scanning of a word document - you are scanning an image. If that image is a page with words printed on it or a picture , it doesn't mater to the scanner, to it all are pictures. So in the end you have a picture of the scanned image - in your case a picture of the page. Since you can't edit a picture with word you must convert that picture into an word document. For that you use an OCR program
http://en.wikipedia.org/wiki/Optical_character_recognition
This printer has an OCR program in it, but you must activate and guide it yourself, it won't do the job automatically. To learn how to use it launch the installed HP Solution Center from your pc, it's a part of the driver that should have been installed with it.
When I scan anything on
Welcome to FixYa.
Restart your computer in clean mode. The Clean Mode temporarily disables all the programs that are being loaded during the startup of your computer.
Click start.
Type msconfig in the search box.
Click on msconfig from the results.
System Configuration Window will open.
Click the Service tab.
Check the box that says Hide all Microsoft services on the lower left corner of the window.
Uncheck all the boxes in the list.
Click the Startup tab.
Uncheck all the boxes in the list.
Click on the Apply button.
Click the OK button.
You will be prompted to Restart.
Click Restart.
Hello, I have a HP
First thing you have to ccheck if theree is an AC output on your outlet. Then Check the Power cord of your unit. Then Check the Fuse if busted.
Hope this help to your problem keep on touch
Cant print hp desk jet
In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken . Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts.
I dont know where to put the papper in
I hope I can help!
Basically, you are going to load the paper in the very bottom tray. If you fold down the frontal tray, there should be enough space for a good stack of paper (but don't overload it!). You just put the paper in the bottom tray, and then it will feed through there and come out the tray just above it when it prints. If you need any more specific instructions, I will post a link to the HP manual on this printer. Just click on "load originals and paper" on the left, and then "load paper" and it has some good instructions with pictures. If you need any more help, just comment!
Link
I hope that helps!
My hp deskjet F4180 all
Hello there
Welcome to FixYa!
i hope there isn't any problem with your machine . i think the Drivers are not communicating with the scanner.
download the complete drivers as you haven't mentioned the Operating system your using any how click here for the driver package and software as well .i recommend HP Multi-function Basic Driver.
1.then choose the O/S (operating system )
2.download the file .
3.when download is complete . Run the file and go through Recommended settings if you understand the setting then Go for Advance settings . finish the setup and then Restart your system and Printer manually
I do hope that it fixes the problem your facing
Do comment if it helps you in any manner
Not finding what you are looking for?