Canon PIXMA MP210 Photo All-In-One Printer - Answered Questions & Fixed issues

this is an ENGLISH ONLY website

NEW but were they OEM

Canon Printer Error Code 6000 is one of the typical errors that occur very frequently. It happens while users are attempting to print all of the printer's documents. The problem of Paper Jam is the main cause of this failure. There are several explanations why Canon Printer Error 6000 will happen when you work with a Canon printer. One of the factors is that one of the most simple common explanations is where the paper feed tray is blocked by certain dust particles and bits of paper. Another reason for this is that the paper feed tray is not adequately connected to the printer. If there is a tonne of a print order. Reasons that cause Canon Printer Error Code 6000: 1. The feed tray of the printer is improperly fitted. 2. A large number of documents near the printer. 3. The line feed is scratched or smeared. 4. Giving multiple paper print commands at once. 5. Faults within the sensor unit or in-line feed slit. Follow Blog: Canon printer error code 6000 Thanks for reading.

Test your printer on an ordinary document. If it prints OK it's not your printer or document.

manual replacing the print cartridges --> try rotating the left white gear back and forward releasing the mechanical lock of the print head it is a small plastic peace in the back of the of the head ...replace the cartridge as you need ...


about the error p03 it indicates a mechanical jam (head carriage - paper jem - paper pickup mechanizm - head cleaning mechanizm ) also clean carfully all sensors from inside ... it can give you a mechanical jam if blocked

mujhe canon pixma mp160 ka software chahiye

It should have a fuse on the internal power board so look at where your power cable enters then you should see glass fuses, check them and you can normally see if the thin wire inside has split or if the fuse has turned black.

no both are different
Here are the list of cartridges u can use
MP210
PG-30 Pigment Black
PG-30 Pigment Black Ink Cartridge
PG-40 BLACK
CL-31 Color FINE Ink Cartridge
CL-41 Color
MP240
PG-210 Black Cartridge
CL-211XL Color Cartridge
CL-211 Color Cartridge
PG-210 XL Black Cartridge

download the driver that is compatible with mac for your make of printer

Canon makes it ******* owners by using a small electronic chip on each cartridge that opens when it is taken out of the printer. Sometimes removing a cartridge will not open and when replaced in the print head, it works, but if the cartridge sensor fails to communicate with the printer, you would need a resetting device to bring the cartridge back to normal. Rather than become upset with the issue, it would be best to get a new cartridge from any reseller on the internet (not Canon) and go from there.

suspect you do not have the cannon scanning software installed. suggest downloading the drivers from cannon https://www.usa.canon.com/internet/portal/us/home/support/details/printers/support-inkjet-printer/mp-series/pixma-mp210?tab=drivers_downloads Then hopefully the program for scanning is installed. and it works out how your scanner is connected to your pc ?

https://www.youtube.com/watch?v=2qM5By8V8IM

You may check the links below and download the driver for free:

http://download.famouswhy.com/canon_pixma_mp210_all-in-one_driver/

http://drivers.softpedia.com/get/PRINTER/CANON/Canon-PIXMA-MP210-MP-Drivers-100.shtml

http://www.soft82.com/download/windows/canon-pixma-mp210-all-in-one-driver/

Any of these given links should work and provide you a free driver.

Have a good day!

it common with cannon i put a piece of wire tape on the ink cartridge level gauge so it gives full reading all the time..you get more printing less warnings/errors.

Try the following:

1. Reseat the ink cartridges.
2. Reset the ink absorber.

If this doesn't work then the printer may need repair. for more software relate issue visit https://cbrtechsolutions.net

replaced the colour new ink cartidge

Hello Error E06 that means Internal Temperature Error

• Clean the inside of the printer MP210
• Change Main Board

Worldwide Electronic Hardware Solution

Hello if you got error code please find code number problem and their solutions. for reset ink waste or B500 or P7 errors in all canon models you have same solutions visits a link: Worldwide Electronic Hardware Solution

clean the heads and d/l print utilities

Open the printer, take the small handle off the ink cartridge, then snap the cartridge in the printer. Done:)