20 Most Recent Canon PIXMA MP210 Photo All-In-One Printer - Page 8 Questions & Answers

HiCan you see the jammed paper?Open it up and remove the stuck paper manually.Be careful not to touch anything inside the machine. Turn the printer off and on.

There are two possible ways to remove the error from your printer. First is to actually clean the absorber pads that are full of waste ink. The second is to reset the printer to clear the error and let the printer print again.
Clean the two absorber pads. There are actually two absorber pads located on the right side of the printer, under the ink cartridges when the carrier is in the home position.
Accessing the pads and remove them for cleaning?
Turn on the printer. Lift the top cover to expose the ink cartridges. As soon as you lift up the cover the cartridge carrier will move away from its home base. Then the pads will be exposed. It will be a dirty job so be prepared with your tweezers and extra cloth for some ink spillage. Using the tweezers, lift up the pads sitting on the rubber retainer. The pads can be easily clean by placing them under running water. Use warm water to remove the ink from the pads. Dry the pads and reinstall them. Same procedure if you are installing new pads.

However, the problem will not be solve especially if you are currently facing the waste ink absorber full error or E-27.

Reset Waste Ink Counter Canon Pixma MP210 and Canon Pixma MP220

1. Start with printer off

2. Press and hold resume Button (triangle in the circle) and click "Power" button. green led should be on

3. hold the Power button, release Resume Button.

4. Without releasing the Power Button, double click "Resume" button and then release Both Buttons.

5. Click "Resume" for four times then click "Power" button, to confirm the selected action (reset counter absorber).

6. Turn off the printer and turn on again

7.

Please rate this solution. Let me know if you have any more questions. Thanks.

HiTry holding the Stop/Reset button for a long period until the error disappears.Solved?Try re-installing the cartridges.Make sure they're well seated into their slots.If new cartridges been installed, make sure they're not damaged and are correctly installed.

You can download the Canon printer drivers from their supportWEB site. Please click on this link and select your model printer to download :-http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

I think I know what you are asking. You want to scan in 4 documents, but end up with only one pdf file? You can scan them in as 4 files, and then combine the files into one with the right software. There are some free tools that can do this, but they are not as easy to use as software you would have to pay for. No, there is at least one free web-page-based utility to do this now. You have to decide which utility you want to use, but here is you you would find some: http://www.bing.com/search?setmkt=en-US&q=combine+pdf+files+into+one

It could be, if it leaked over the contacts, or dried up for lack of use, it could easily throw this error.

E9 2001 MFP does not support the model of the connected digital camera

Hello,Depends which model. However, i can say that most PIXMA's are compatible with Mac OS X

Hi,Is the printer new?If so,make sure you remove all the packaging materials.

• Ensure you load the paper properly.
• Press the on/off button.
• Reset the ink cartridges.

Hope this helps.Thanks!Please rate this answer.

Hi,Those numbers could indicate a few things.

• First number 3 means you need to check for paper jams.Turn on the printer.Open the scan unit or the front cover,check for any stuck papers inside and remove them.
• Check the rear paper tray and remove any stuck papers.
• Number 5 means you need to check the cartridges.Open the scanning unit and check if the cartridges are installed correctly and are the right cartridges.Install the correct FINE cartridges.
• Turn printer off and on again.
• If error continues you may have to replace the printhead.