20 Most Recent Canon MP610 Photo All-In-One Printer - Page 3 Questions & Answers

Try turning it off, unplug it from the wall, don't use a power strip. Plug it back into the wall (no power strip) and see if that helps reset everything...

Hi and welcome to Fixya

Error 5200 is a service error
Follow this solution step by step

1. With the printer turned on,unplug it
2. Open the top and bring the ink cartridge holder to the middle
3. Raise the gray bar and remove the print head assembly with the cartridges in it
4. Lower the gray bar with the head missing and close the top with the head out
5. Restore the power,wait till the printer starts
6. It will tell you to put in the cartridges, Put in the cartridge
7. Restore the print head, close the top and the printer will resume working

Error will be removed.
If you have already tried all of the above and still you have error then it is probably that your Canon printer is in need of servicing by a service professional.
So go to the Canon Service Center. If you want to get support on Call then Call Canon Support by phone, at 1-800-OK-CANON (1-800-652-2666)

Your Rating As Four Thumbs which are given below to this solution will appreciate me
Thanks

Two possibilities come to mind:

1. There is a function in many printers that lets you print in the single colour of your choice. Check every tab and every "advanced..." dialog box you get when you are about to print. Then go to the printer's properties in the control panel and check whether there's anything like that
2. Many printers let you print black with black ink, OR alternatively make black by mixing the other three colours CMY. Look for that setting in the same places and deactivate it

Hi,


1. Turn off the printer

2. Open cover

3. Print head and cartridges manually move to the left

4. on the extreme right is a white plastic cover is visible, which is attached to a spring

5. Clean the cover carefully (no chemicals, not wet) and gently push it back (it clicks) and remove any impurities -> the black collecting sponges for the storage of the print head can see

6. Print head and cartridges manually back to the right move

7. Turn on printer

If the above steps does not fix the problem, Click on the link below to check the forum for more details on resolving the issue.
Canon Mp610 Error 6A00


Regards,
Shawn



* Please rate this solution with Thumbs up and Testimony to help us improve providing support

get repaired..

error code 5200

It would be much better if you could elaborate more about your printer problem.If you problem is about the blank ink cartridge not printing then make sure you are using original canon blank ink cartridge

Without the resetter it will continue to give error codes, holding the resume button for 5-10 seconds sometimes will turn off ink level reporting, but you either need the resetter or to purchase and install reset circuit boards on each cartridge you refill.

Very easy. Follow this link...
http://www.avery.com/avery/en_us/Templates-&-Software

you can download the free Avery software. Buy whichever labels you want. Then using this software you just put in the item # (the number on the pack of labels you buy) This software will work for any size label they make, and it will let you design & print them. I have the same printer & use the Avery Design Pro for labels.
If you find this helpful plz rate it 'fixya' for me. Thank you kindly.