20 Most Recent
Canon MP140 PHOTO AIO All-In-One InkJet Printer - Page 4 Questions & Answers
MP140
error 5100
5100 is service error. just follow this steps to fix this,
1. Hold RESUME then press & hold POWER 2. Release RESUME, then press it twice, the light should go amber then green again. 3. you're now in service mode (you can release POWER now) for reset waste tank reset is 4 presses of the RESUME button. To confirm, press POWER once.
I have inserted a new
Try 'aligning' the cartridges...
If you have done that already, do describe the problem in more detail - Are you getting streaked areas?
E 4
Error E4 means that no ink cartridge is installed. check your printer if it has ink cartridge installed.
please visit
http://pcmediks.blogspot.com
I dont know how to
lift the lid on your scanner lay the photo face down then select scan document/photo it will ask what format you want to scan it then it will ask where you want to save it browse select the file/folder where you want to save it (my pictures) most common
hope this helps
My canon pixma mp140 won't scan when i press the
This is onlt a try may work
Turn off the canon printer
Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
Hold the Power Button, release the Resume Button.
Not releasing the Power Button, double click “Resume” and release Both Buttons.
Click “Resume” for Four times
Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
E3 in my canon mp140 can u help me?
There this may work for you, it has worked for many here I given this advice so gave it a try it could work for you.
Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.
First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.
If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
The paper wont come out
Possible that the roller is jammed , the mechanism is jammed.If the printer is responding then remove off the jammed paper as it will reset automatically.
If not there can be failure of the mechanism( being struck) or possible motor drive failure.
Remove motor and manually turn to see if the mechanism turns over. Once confirmed set backmotor to test.
I've just changed the black
Hi both of the ink cartridges need to have ink in if one is empty then it just wont work, a lot of people think they can just replace the black but find out they need to replace both to be able to use the printer, their is no way around this and their are no settings you can change to turn the color ink off,
sorry their is no easy solution but without replacing the color as well it just keeps giving you warning and wont allow you to print anything
let me know if you need further assistance ok
plz rate this solution as i have a whole page of unrated posts, thanks
E-24
E24 = Purge unit error.
You may need to also clean out you waste ink. try this below..Resetting Printer Canon MP140, MP160, MP180, MP210, MP220, MP460,
MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830,
MP960, MP970
1. turn off the canon printer
2. resistant "resume button" (red triangles) + key "power" at the same time.
3. tetep hold the "power", release the button "resume Button"
4. without releasing the button "Power", double click the "resume", then
then release both keys.
5. click the "resume" four times fast
6. press one time the "power" to confirm "reset counter absorber."
7. to function "disable the printer" press the "power" once again.
Below is your user manual.
http://www.retrevo.com/support/Canon-MP140-Multifunction-Printers-manual/id/3124ci174/t/2/
Not finding what you are looking for?