20 Most Recent Zyxel P660HW-D1 Router - Page 4 Questions & Answers


There will be a small button or pin hole on the back (use paper clip) From the picture it looks like the reset button is next to where you plug in the power.
Press and hold this button in for about 15 seconds to restore your router to defaults.
Device support page. http://www.zyxel.com/uk/en/products_services/p_660hw_series.shtml
Comment back if you need more assistance. Give a thumbs up if you find this helpful thanks!

Zyxel P660HW-D1... | Answered on Sep 03, 2011


Firmware isn't going to do squat for your speed.

If you want to ensure a fast connection invest in a N standard wireless router.

All you can get out of a G router is 54Mbps

on a N router you can get upwards of 300Mbps.

Zyxel P660HW-D1... | Answered on Aug 05, 2011


You need to log into your router and set a new WPA key phrase or simply read off the old one using an ethernet cable.

Zyxel P660HW-D1... | Answered on Jul 24, 2011


Access your router by going to http://192.168.1.1/ Login to access the web configuration, by default its password is user. Once your in, under Network, select Wireless LAN On the right side under General Tab you can edit your wireless setting including your SSID.

Zyxel P660HW-D1... | Answered on Jul 18, 2011


How are you accessing the router access page? Are you putting in 192.168.1.1 in the address bar?

Zyxel P660HW-D1... | Answered on Jul 15, 2011


You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Zyxel P660HW-D1... | Answered on Jul 15, 2011


1.You will have to allow the wireless device to be seen in the router.
This means you will have to access the wifi allowance table in the router
Procedure steps for this is in the router user manual > usually found on the installation CD that came with the router or you can go to the manufacturers site and get the instruction set to do this.

Zyxel P660HW-D1... | Answered on Jul 14, 2011


If you have called your service provider and they have confirmed that the connection is good then there may be a problem with:

A- The router itself
B-The physical connection from the ISP's last access point to your router.

Your best bet would be to (if you haven't already) reset the router and wait AT LEAST 10-15 seconds before plugging it back in.

Another solution would be to go to the router configuration page and check the router logs to see when the problem first occurred, and what could be causing it.

Zyxel P660HW-D1... | Answered on Jul 10, 2011


Connect Router to the computer or use a computer which is connected with router
1. Open Start - Run - CMD (To open command prompt, for Vista and win7 type cmd in search) 2. IPCONFIG and press enter 3. Make a note of Default gateway address (usually its 192.168.1.1 / 10.0.0.1) 4. Open Browser and type the default address(For e.g http://192.168.1.1) 5. Type username/password for router (usually you can find this info on bottom of the router) 6. Goto Wireless settings and there you can see your password and also you can change name and password (To change name edit SSID)
7. Save settings
Thats it, go to go now Hope this helps

Zyxel P660HW-D1... | Answered on Jul 06, 2011


Here's a link to the Spanish version of the user manual http://goo.gl/dLQAY. The interface language of the router may still be in English, but the manual should explain it to you.

Zyxel P660HW-D1... | Answered on Jun 18, 2011


Hi there.

Try connecting the Macbook Air to other wireless routers. Let see if it connects. We need to narrow down the issue.

What is the router's firmware version? You can download the latest version here.


Let me know what happens.

Thank you!

Zyxel P660HW-D1... | Answered on Jun 02, 2011


The dafault ip adresse is: 192.168.1.1

The dafault password is: 1234

Try this and let me know if it works

Zyxel P660HW-D1... | Answered on Jun 01, 2011


Kindly let me know That what you are trying to do with this router and what is the make and model of your iPad and what software you want.

Zyxel P660HW-D1... | Answered on May 31, 2011


Go into the wireless settings in the embedded web server (usually 192.168.2.1 for zyxel) and make sure the SSID broadcast feature is turned on.
If you get stuck, post a reply to this solution and I'll provide further assistance.
The manual is available online, but sometimes their server chokes and the download fails, and of course manuals aren't always the easiest things to follow if you're already lost!

Zyxel P660HW-D1... | Answered on May 28, 2011


default password is 1234

Zyxel P660HW-D1... | Answered on May 26, 2011


You can download the drivers from the link below.
http://drivers.softpedia.com/get/FIRMWARE/Others/ZyXEL-P-660HW-D1-Firmware-340AGL1C0.shtml

Hope this helps. Good Luck.~SmokinJoe~

Zyxel P660HW-D1... | Answered on May 25, 2011


Are you sure this is the correct address??

If you have access to the internet, the normal way to access a home router would be this

Start
RUN
CMD

in the black window that pops up, type IPCONFIG /ALL

Look through the list for the active adapter, and then read the ip address that is listed as DEFAULT GATEWAY , this will be the address of your router (other than the 0.0.0.0 addresses) You may have more than one adapter, however the active one will have addresses next to them that arnt 0.0.0.0

Zyxel P660HW-D1... | Answered on May 21, 2011

Not finding what you are looking for?
Zyxel P660HW-D1 Router Logo

437 questions posted

Ask a Question

Usually answered in minutes!

Top Zyxel Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Joaquim Martins

Level 3 Expert

1127 Answers

Are you a Zyxel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Zyxel Computers & Internet

  • Zyxel Computers & Internet

Most Popular Question

spare zyxel p660hw d1 possible use

  • Computers & Internet
Loading...