20 Most Recent Zyxel P660HW-D1 Router - Page 2 Questions & Answers

It isnt a problem. Its just an indicator.

First I would try a factory reset, by holding the reset button on the back of the router for like 5 seconds while plugged in.

P-660HW-D1 Jan 19, 2007 Uaer guide - Server 1Server 2

Type into Browser; http://192.168.1.1/The password should be; admin

You would see an extra IP device connected on DHCP via the web admin.

No, set the channel to different settings.

I believe you can only access it from a web interface, You did not state how you were using the command such as "from a command prompt on windows", "attempting to use a program such as telnet" or other.

Try these guys.http://portforward.com/english/routers/port_forwarding/ZyXEL/P-660R-D1/Minecraft_Server.htm

Here, on "DEFAULT SERVER" put the IP you want for DMZ.

The default password for these routers is 1234 and no username. SO if you want, you can reset the router to Factory defaults and then reconfigure all again with your own password

slt tous le monde svp je cherche le mot de passe de router inalambrico telefonica zyxel p660hw_di 1234 ne marche pas merci.

This router does not have the typical "strict or open" NAT types. Looking at the manual, it looks like what you want is NAT enabled and SUA only enabled.

http://www.zyxel.com/web/support_download_list.php?indexflag=20040906173729&ModelIndexflags=0,420041221102511,420041221102520,420050117110858,420050117110916,420050117110934,420050831093216,420050831095441,420060420160946,420060420161739,420060816160116,420080815092146,420090427144843

Page 133 has the details.

Log into router
go to the NAT tab
Enable NAT
Enable SUA only
Apply the change.

I believe certain routers are certain NAT types. If there is not an option to change NAT type on the web interface for your router, then it is what it is.Hope that helpsChristopher