20 Most Recent Belkin N1 Vision Router - Page 6 Questions & Answers

Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Anita, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Susie take a look at window 8 similar problem look at rimshots answer http://www.fixya.com/support/t6138715-belkin_f4u017_7_port_usb

Fixing ADSL Not Connected Error for Belkin Modem Router

Blue? the n300 colors..... 4 LED Descriptions Router Link LED This LED indicates the connection between the extender and the router or access point. Solid green . Best connection. Solid ambe r. Good connection. Solid red . Poor connection. Off . No connection. Device Link LED This LED indicates the connection between the extender and a computer or mobile device. Solid green . Best connection. Solid amber . Good connection. Solid red . Poor connection. Off . No connection. Power LED Solid amber . The extender is booting. Solid green . The extender is powered on. Off . The extender is powered off. WPS LED Solid green . WiFi security is enabled (WPA or WPA2). Blinking green . A WPS connection is being established. Off . WiFi security is not enabled. Note: If the Router Link LED or Device Link LED is amber or red, Find the Best Location

This is the password or passkey that you normally use to connect to your wireless router.Refer to and follow instructions especially pages 4 and 10 - 12 , 16,17,18, 12 You can use reset to restore back to out the box status.www.belkin.com/support/dl/MAN_F9K1111v1_8820-01079_RevA00_N300_RangeExtendr (2).pdf

I clicked google then "Bilkin support" no quotes. found them in 1 second flat then search box there, your model and go this, (spoon feed day) https://www.belkin.com/us/search?text=f8m744

Solution:

Step 1:
Make sure the that router is connected to your modem with an ethernet cable via the router’s internet (WAN) port.

Step 2:
Unplug the modem from its power source and make sure that it's totally turned OFF. Then re-plug the modem to the power source.

Step 3:
Unplug your router’s power supply, wait for 10 seconds and then plug it back in. This will cause the router to reestablish communication with the modem.

If you still cannot browse the web, contact your Internet Service Provider (ISP).

Solution:

Step 1:
Make sure the that router is connected to your modem with an ethernet cable via the router’s internet (WAN) port.

Step 2:
Unplug the modem from its power source and make sure that it's totally turned OFF. Then re-plug the modem to the power source.

Step 3:
Unplug your router’s power supply, wait for 10 seconds and then plug it back in. This will cause the router to reestablish communication with the modem.

If you still cannot browse the web, contact your Internet Service Provider (ISP).

Solution:

Step 1:
Make sure the that router is connected to your modem with an ethernet cable via the router’s internet (WAN) port.

Step 2:
Unplug the modem from its power source and make sure that it's totally turned OFF. Then re-plug the modem to the power source.

Step 3:
Unplug your router’s power supply, wait for 10 seconds and then plug it back in. This will cause the router to reestablish communication with the modem.

If you still cannot browse the web, contact your Internet Service Provider (ISP).

Site reference link:
https://www.belkin.com/us/support-article?articleNum=56519

There is a physical issue with the connections inside of your keyboard. The C and the D keys are on the same data line and the C is getting triggered when you press the D key.

You may want to click to wireless network icon on the bottom part on the rght part of your monitor and search for network. Then you may want to chose your network and, if you chosed this option, to type the password for the network.
Let me know if you were successful in solving your problem

If you connect the computer to the router , it works.
That means the wired connection is OK.
Open the set up page of the router check the wireless settings of the router.
I think your network is secured and you are not typing the correct network key.
just open the router set up and check the wireless settings .
Click Here for step by step solution

Hello,

The easiest way is to turn on the mac restriction feature and only allow the macs from the machines that you want to have access.

Since I didn't see the model of router listed, you will need to refer to the manual for exact instructions on enabling that feature.

You can get the mac addresses from the machines that you want to have access to the router in xp by click Start > Run > type cmd.exe and press enter. Then type ipconfig /all and look for the physical address of your adapter. It should be in the format of XX-XX-XX-XX-XX-XX. Once you get that information you can allow it in your router.

This will give you basic security on your router.

Thanks

Hi Christopher s crisp, Is it blinking Orange or steady? Blinking amber: The Router can't detect the modem. Either the modem is off, is not plugged into the Router, or is unresponsive. It could be the modem. You can try connecting the modem directly to computer bypassing the router and see if that works. Check the LED on Modem. Do you have other computers to test the connection? Might need to talk to ISP if issue with Modem. Let me know. Thanks

Go to Belkin Support --->BS.