20 Most Recent Sony Bravia XBR-Series KDL-37XBR6 37-Inch 1080p LCD HDTV - Page 10 Questions & Answers

Unplug the player from the wall, press power button on the player for about 10seconds and plug in power again.

Assuming you are using a cable to connect your cell phone to the speaker you could be overloading the input of the speaker when you turn the phone volume up very high. That would cause distortion that might damage the speaker so it shuts down or turns off.

cara membuka protect push power sony MHC-RV8

Hi my Sony mgongo amplifier says usb protect why ??

I suspect there is either a problem with the radio (AM side) or most likely it is a matter of poor AM signal strength where you are and/or high levels of interference. With FM reception the wire lead of the earphones acts as a fairly efficient antenna but AM reception is via the internal ferrite rod aerial that also is part of the tuned circuit and consequently is not only highly directional but is sensitive to vertical/horizontal orientation - if the signal is polarised vertical the antenna is more efficient when it too is vertical, unfortunately horizontal polarisation is more common. Development of AM receivers stopped decades ago due to it falling out of favour because of high levels of interference around population centres causing much dissatisfaction and a move to FM and over the last two decades an increased interest in digital radio.

The internal antenna cud b issue or some capacitor cud b

What do you want?You have to ask a question for us to know what you need to know!Ask a question and we will try and help!

This is a very good make!

Are the videos in the right format? The format that works for the mp3 is MP4 video. you must convert your videos using a mp4 converter.
i use winavi ipod converter (works with nwz a728)

Hope This Helps!

Sources: I have one myself and came across this problem :)

https://www.youtube.com/watch?v=tJ--L7peFMM

1. Unplug the power cord from the electrical wall outlet.
2. Plug the power cord back into the electrical wall outlet.
3. Press the power button. to turn on the stereo system.
4. Press and hold the STOP button. and EQ button at the same time until RESET or RESET OK appears on the display panel.

https://www.sony.com/electronics/support/articles/00026921

Sir repetadley pushpower comeing why

RTM? the sales add states 1.5V (normal) Sony Alkaline-Manganese Battery No. 189 see here https://www.ebay.com/itm/SONY-LR1130-Battery-Alkaline-Button-Cell-189-Battery-0-Hg-10-Batteries/143537644131?hash=item216b82a263:g:x4cAAOSwGDJeTtUN

if the line cord has power, there is fuse inside see service manual here. https://www.manualslib.com/manual/1093721/Sony-Str-K740p.html?page=41&term=fuse&selected=4 try not to get electrocuted, (GRIN)

you forgot to say what fails. , my guess it needs to be reset? RTM , lost the manual>? here is the free service manual , RTM? https://www.manualslib.com/manual/1109674/Sony-Hcd-Rv7.html# first google hit , BTW.

RTM Leo? a speaker system . it does have a manual I see support at maker nor manual laying about on the web sorry install to what, name what you are doing.. first. the speakers plug into them selves with wires cables then the big speaker need power cord/pack to AC power then the 3.5mm port on speaker (LINE-IN) goes to PC line out green jack,

In this problem change the cassette player belt it will be OK 100% .I just solve the problem in my set

Hi have Sony STR-AV 970 not getting any sound from receiver panel lights up, and the FM
Station is up and running but no sound from either A/B speakers as well as the phones

Try this and let me know. First unplug the unit. Plug it back in. When you first push the power button, you should hear 1 click followed by another withing 5-20 seconds. My guess is that you don't hear the second click. Am I right?

Sometimes the TV has to be selected in the setup menus to send the audio to the rear panel outputs

+++++++++++++++ https://www.sony.com/electronics/support/audio-components-receivers-amplifiers/str-dg800