Top 20
Sylvania LD370SS8 37 in. LCD Television - Page 2 Questions & Answers
None of the codes work
Try website 1-800-Remotes Factory original,buy the exact remote.Hard to find codes in un popular tv models.
1/13/2010 2:59:43 AM •
Sylvania...
•
97 views • 0 helpful votes
SYLAVANIA green light blinks a few times and goes back to red
Funai used lousy wire going from the inverter board to the backlight
tubes. Look for any wires that are touching each other. The
insulation could have broke down between them and started arching. Get
some heatshrink tubing to recover the damaged wires.
9/20/2009 5:32:03 PM •
Sylvania...
•
923 views • 15 helpful votes
The sound on the tv is messed up
if you are using a digital sat receiver that is spanish not all the channels will come in english , ill assume that your living in spain and have digital+
for the sound problem use a scart cable then check the sound settings are set to normal
post back if your still having problems
9/8/2009 3:35:10 AM •
Sylvania...
•
156 views • 0 helpful votes
The power on my 36inch hdtv flat will not come on
The most common problem is the transformer inverter board. The small transformers power up the LCD screen. If one blows out, the TV goes into protection mode like it's doing right now. Your Tv may have 8 of those on a power inverter board. It' a good thing your under warranty, because I believe the board costs over $250.
If possible, I would like to buy your bad board when they replace it.
My e-mail is
[email protected]
3/30/2009 6:21:39 PM •
Sylvania...
•
374 views • 0 helpful votes
Need proper remote code
There are no known codes for most Sylvania models. The few codes published on the Internet usually do not work. The only way is trying remote auto program. I am telling you this because I have spent a while looking for sylvania codes for nothing. Manufacturer did not make them available.
4/16/2009 12:24:39 AM •
Sylvania...
•
83 views • 0 helpful votes
Closeup the picture is lousy not sharp as in the store
first of all ------- Try changing the cable to another connector. If picture is still poor, try changing the cable for a new one. Also verify that the sky unit (or any other unit you are using )is giving a good picture by connecting it to another TV and see if picture is clear.
You could also verify the connections on the TV by inputting video from another source such as VCR or video camera.
if still the problem with new cables connected then ----
you will have to get it repaired because the IC component on the main board are got weak.and so the picture is getting worse slowly --- slowly.and later on it will get more damaged if not got repaired.so to avoid the damage get it repaired fist before further use.the cost of reparing will be negligible as its just a ic problem.and cost of single is near to $1 it depends upon how many ic are faulty.
but its worth getting it repaired.
thank you for using fixya.
4/5/2009 4:14:07 PM •
Sylvania...
•
26 views • 0 helpful votes
I have an old Sylvania tv and it won't turn on
Here are some troubleshooting tips to try. However, as it is an older set, if these tips fail, the cost of a repair at a shop might exceed the value of the TV. In short, a new TV may be in the works. Cross your fingers. One of these tips may work.
Let's troubleshoot the issue and try to get it working:
If you are using a remote, check the batteries in it. If you are using several remotes with it, try the alternative remote. Sometimes there is a glitch affecting the remote for a Roku where it won't turn on the TV other than a powered black screen and you have to use the other remote to turn it off and back on and then the Roku screen pops up. I have not sorted out why.
Check Power Cord and Connections:
First, ensure that the power cord is securely plugged into both the TV and the electrical outlet.
If you suspect a faulty power cord, consider trying a different one.
Reset the TV:
While most Sylvania TVs don't have a dedicated reset button, you can perform a manual reset:
Unplug the TV's AC adapter from the electrical socket.
Press and hold the Power button on the TV for 20 seconds.
Plug the AC adapter back in and turn on the TV.
Check Audio/Video Cables:
Inspect the audio/video cables connecting your TV to the satellite or cable receiver.
Ensure that the color-coded prongs match their respective connecting points.
Correct any mismatches (e.g., white cable into a red port) by reorganizing the prongs.
Inspect Coaxial Cable:
Look for the coaxial cable on the rear side of the receiver, attached to the port labeled as ANT IN.
Confirm that the connection is firm; a loose coaxial connection can cause display issues.
Tighten the cable by pinching the silver band on the end and rotating it clockwise until secure.
Check for Interference:
If distortion continues on the TV screen, consider nearby interference.
Power-hungry appliances can cause electronic interference, affecting display quality.
Visit a Repair Shop:
If the above steps don't resolve the issue, you may need professional help.
Some technical faults, such as a blown fuse or faulty capacitor, require expertise in dismantling and soldering.
If uncomfortable with such tasks, consider visiting a repair shop
2/3/2024 3:31:54 AM •
Sylvania...
•
23 views • 0 helpful votes
I have a 37in limited edition Sylvania TV I have tried every code on my Phillips universal remote none work. Is there a specific code.
- Auto Code Search:
- Turn on your Sylvania TV.
- Press and hold the "Code Search" button on your Philips remote until the indicator light stays on.
- Press the "TV" button on the remote to set it to control the TV.
- Press the "Power" button repeatedly until the TV turns off.
- Press the "OK" or "Enter" button to save the code.
- Manual Code Entry:
- Find the code for your Sylvania TV in the Philips remote control manual. If you don't have the manual, you may be able to find it on the Philips website.
- Turn on your Sylvania TV.
- Press and hold the "Code Search" button on the remote until the indicator light stays on.
- Enter the code using the number buttons on the remote.
- Test if the remote now controls your TV. If not, repeat the process with a different code.
- Try Common Codes:
- Some common Sylvania TV remote codes for Philips remotes are 0810, 1684, 1886, 2183, 1081, 1172, 1196, and 2049. Try entering these codes manually.
1/9/2024 4:53:56 AM •
Sylvania...
•
32 views • 0 helpful votes
Why no tv picture on my Sylvania #ssc092 ac/dc tv/vcr combo?
it is a very simple TV, is TV connected to cable? Here is link to manual copy and past download and save for future reference. It is very old and has CRT not LCD.
https://www.manualslib.com/manual/776815/Sylvania-Sylvania-Ssc092.html#manual
10/20/2023 3:58:46 PM •
Sylvania...
•
39 views • 0 helpful votes
Not finding what you are looking for?