20 Most Recent Onkyo TX-SR605 Receiver - Page 7 Questions & Answers

Try disconnecting the power for a minute or two. Usually it doesn't take long to swich between functions.
To get the Seup menu on the screen, you first need to press the Receiver button before pressing Setup. Did you do that?

Change the batteries. If, with new batteries, the behavior remains, then you may be out of range.

You can download Onkyo universal remote codes with instructions here.

I hope that helps.

So perhaps it's a source sound issue. THAT would best be investigated at the Dish receiver. Consider it's audio settings and how it interfaces with the Onkyo.

What did you try to do when it stopped working?

Sony TV codes for the Onkyo TX-SR605 are : 0000, 0650, 1100, 1167, 1300, 1505, & 1651.

Instructions for the Onkyo RC682M and more remote codes are available here. The Onkyo TX-SR605 manual is available here.

I hope that helps.

Have you tried this AT&T code 00858. Motorola set-top box codes include 00476, 01376, & 01562.

You can download Onkyo universal remote codes with instructions here.

I hope that helps.

Philips Blu-Ray player codes for Onkyo universal remotes are: 33007, & 33016.

You can download Onkyo universal remote codes with instructions here.

I hope that helps.

Check speakers for proper impedence and/or
shorted wires! Even a small "fray" or "strand"
can make a short!

press and hold vcr 1 button and then push power button, it will reset

Please do you require a user manual for this unit?

Let me know in your response.

Cheers

hdmi is video only

you will need to use the rca/phono inputs for audio.

you will need a stereo mini jack to steroe rca/phono

use the i/p marked aux/cd/

make sure the volume on the onkyo is turned DOWN before connecting any new input source.

The output from most laptops is designed for headphones so you may need to adjust the volume on the laptop DOWN as well.

Perhaps start off with laptop at 30% and the amp DOWN then increase the amp until you can hear the laptop sound.

To get good quality audio from a laptop you would be beter off with a USB sound card.

hope this helps, thanks for using FixYa

if this is helping please vote.

hi look at these two posts

First

second

hope that helps

After a long effort searching on Google, I found a solution. There is a Late night setting on the remote that limits the loud sounds scenes so it is not much loader than the dialog. Works great, I can't believe I never notice the button before.

Best bet is to visit your local Radio Shack. They have several options that can be easily mounted in your attic. expect to pay about $80 for a high quality antenna plus you will need some basics for installing which will run about $30.

Don't waste your time with trying out the small ones that sit on top of your TV as they are worthless.

There is nothing to "set" on the receiver you will just split the coax cable coming from the antenna to your TV, VCR and then to the receiver, once the antenna is aimed you should pick up FM stations clearly.

The Radio Shack salesperson should be able to tell you what direction to aim it to or see this site.

antennaweb


Hope that helps

IF and only if, your receiver has connections labeled as "pre-out" can it be connected to an external amplifier.

If it does, then you connect from the left and right channels from the receiver, to the left and right channel on the amplifier.

Connecting directly to the TV is ideal....but then you would have to connect the audio through coax or optical unless the bluray player had an additional HDMI out.
So...what connection is going from the receiver to the television when it does not provide picture? If you do not have HDMI, DVI or component video going from the receiver back to the TV then you won't get a picture. However, you may not also get a picture if the video output resolution is adjustable in the receiver as well and does not match...make sure that the TV is set to the same resolution as the receiver, and that the video output of the player is also set the same.