20 Most Recent Panasonic KX-TG1033S Cordless Phone - Page 4 Questions & Answers


Do the following:

Select MENU
Select INITIAL SETTINGS
Select CALL BLOCK

Find and ERASE the number you want to remove the block from.

Panasonic... | Answered on Jun 09, 2014


you have to clear them. it will show missed call on all the ones you did not answer the call on.

Panasonic... | Answered on May 15, 2014


inter this code:

726276642












Panasonic... | Answered on May 08, 2014


I found an exact replacement at partstore.com. PANASONIC OEM Original Part: L0AA02A00095 Telephone Micro Speaker

Panasonic... | Answered on Mar 29, 2014


The answering machine is currently full. Please listen to and erase any unwanted messages.

Panasonic... | Answered on Mar 11, 2014


I had this same problem and found this in the manual:

" If the handset still indicates there are
new messages even after you have
listened to new messages, turn it off
by pressing and holding {CLEAR}
until the handset beeps."

It worked!

Panasonic... | Answered on Jan 24, 2014


Greeting message
When the unit answers a call, callers are
greeted by a greeting message. You can
record your own greeting message or
use a pre-recorded greeting message.
Recording your greeting
message
You can record your own greeting
message (2 minutes max.).
1 {GREETING REC}
2 Within 10 seconds, press
{GREETING REC} again.
3 After the base unit beeps, speak
clearly about 20 cm (8 inches) away
from the MIC.
4 Press {?} (STOP) to stop recording.
Using a pre-recorded greeting
message
If you erase or do not record your own
greeting message, the unit plays a prerecorded
greeting message for callers
and asks them to leave messages. If the
message recording time (page 39) is set
to “Greeting only”, caller messages
are not recorded and the unit plays a
different pre-recorded greeting message
asking callers to call again.
Playing back the greeting
message
Press {GREETING CHECK}.
Erasing your greeting
message
If you erase your own greeting message,
the unit plays a pre-recorded greeting
message for callers.
Press {GREETING CHECK}, and then
press {ERASE} while your greeting
message is playing.
Listening to messages
using the base unit
When new messages have been
recorded, the message indicator on the
base unit flashes.
Press {6}.
L If new messages have been recorded,
the base unit plays back new
messages.
L If there are no new messages, the
base unit plays back all messages.
Operating the answering
system
Key Operation
{^} or {V} Adjust the speaker
volume
{7} Repeat message
(during playback)*1
{8} Skip message
(during playback)
{?}
(STOP)
Pause message
– To resume playback,
press {6}.
– To stop playback
completely, press
{?} (STOP) again.
{ERASE} Erase currently playing
message
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.

check if this works and tell me if any issues

Panasonic... | Answered on Jan 12, 2014

Not finding what you are looking for?
Panasonic KX-TG1033S Cordless Phone Logo

769 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

martin hogg

Level 2 Expert

157 Answers

guyvstewart

Level 2 Expert

115 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Panasonic Lands Phones

  • Panasonic Lands Phones

Most Popular Question

worked fine until today only rings once

  • Lands Phones
Loading...