20 Most Recent Jenn-Air Electric Double Oven - Page 9 Questions & Answers

Spray the hinges with some spray lube. This should help.

possible need new key pad.first check no loose connection from key pad to the control board,if not replace key pad

the cable to the element has more than likely been placed on the wrong terminal or the simmerstat is not working

When did this issue happen" After cleaning?

Did this start after a, "Clean" cycle?

What kind of noise? Has the type of noise it's making different now then previously?

the surge from the original element burning out has destroyed the control board if you can't hear the relays on the board clicking when you power up the elements bake or broil then its either the low voltage side of the board,if you hear clicking then the relays are working but the contacts are burned out and can't pass the current to heat the oven or briol elements

Call Jenn-air 1-800 # should be on the inside of oven They may beable to send one to you if YOU can install or refer a local applaince repair shop for the unit ?

The frame either clips in from the front, or it is part of a walloven that the micro is mounted on. Either way, you can disconnect the old unit, and with a bit of finess, (or a good kitchen maker) you can get a new one to fill the space.

Seems to be a manufacturing error