Samsung WF337AA Front Load Washer - Answered Questions & Fixed issues
Samsung wf337aal/xaa wont pump out water
I have the same washer..same problem..pump tested ok on the bench when connected to power. All lines r free from any obstruction. Any clues r much appreciated.
I have a problem with the soap dispenser being
Remove detergent drawer by pulling out, some models got a tab where you need to push for release. Remove plastic cover from softener compertment and clean it. It maybe clogged up with residues from softener or liquid detergent
Model WF7700N6W1 - front loader - smell? Rubber seal inside door peels back a bit to reveal buildup of gunk between seal and inside frame? retaining water here?
Ok, nothing to worry about. You have bacteria growing in your machine. Clean out the slime from the door seal using a soft cloth and soapy water. DON'T use any harsh chemicals such as bleach !
Remove your detergent drawer (if possible) and clean it thoroughly - a dishwasher will do this very well. Disconnect your machine from the power supply and clean thoroughly inside the space where the dispenser drawer was, using a toothbrush or larger nylon brush and a soft, soapy cloth.
Using liquid detergents all the time can cause a build up of residue over time, which gives the bacteria and mould somewhere to grow. So try a hot wash cycle (without a load) using a powder detergent intended for whites. Washing powders contain brighteners and chemicals which are hostile to mould and bacteria.
Finally, leave your dispenser drawer and loading door open every night to allow fresh air to circulate through the entire machine. This will reduce the number of cleaning occasions needed.
My Samsung is leaking water
I never heard of a washer gasket of drum....Just try to look closer new as your machine is usually something that cld be easily sorted, check if pipes aren' loose or broken.
Samsung WF337AARXAC - door locked
Here are some things you might try:
http://removeandreplace.com/2016/03/22/samsung-washing-machine-error-code-nd-what-to-check-how-to-fix/
Why the inlet valve is not stopping running water?
What happens with such electrically operated valves, is that a calcium (or other mineral buildup) prevents the rubber seals from stopping water flow. You need to replace the valve(s), or clean them thoroughly, using either LimeAway or CLR.
My washer wont spin out
Usually what happens here is that the pump to expel the water is not functioning, the normal problem here is a coin or hair grip gets lodged in the pump and stops the impeller from turning, generally the pump can be removed and opened up to remove the offending article and allow the impeller to operate again, once cleared of obstruction reassemble the pump and refit it. ( be aware, as the machine is still full of water, when you remove the pump the water will flood out so you need plenty of towels so soak up the water that spills.
Where is Filter
The user manual will show how to clean the filter it is fitted at the drain hose. google the make and model for instructions, if you have lost the user manual.
Smelly washing machine
put some bleach in the washer and run a rince wash (nothing in the washer) then run 3 more rince washes to clear out all traces of bleach before you put any closes in it,(or do a hot white wash only) this should work ok, when not in use all ways leave the door open if you can to change the air inside your washer it stops them smelling
Not finding what you are looking for?