20 Most Recent Samsung WF337AA Front Load Washer - Page 2 Questions & Answers

Yes

Not the machine, stop using liquid soap. put machine through a cleaning cycle using a product like affresh.

bang it just to the right of the door lock,...... cheers

Here are some things you might try: http://removeandreplace.com/2016/03/22/samsung-washing-machine-error-code-nd-what-to-check-how-to-fix/

What happens with such electrically operated valves, is that a calcium (or other mineral buildup) prevents the rubber seals from stopping water flow. You need to replace the valve(s), or clean them thoroughly, using either LimeAway or CLR.

You can not by pass the lid lock on the new washers the rely on the signal that is sent to the computer to operate. It is a safety feature, the washer will not work without the lock operating. Why do you want to by pass it?

Usually what happens here is that the pump to expel the water is not functioning, the normal problem here is a coin or hair grip gets lodged in the pump and stops the impeller from turning, generally the pump can be removed and opened up to remove the offending article and allow the impeller to operate again, once cleared of obstruction reassemble the pump and refit it. ( be aware, as the machine is still full of water, when you remove the pump the water will flood out so you need plenty of towels so soak up the water that spills.

The user manual will show how to clean the filter it is fitted at the drain hose. google the make and model for instructions, if you have lost the user manual.

if you cant hear the water filling the machine it will be the hot /cold intake solenoid

put some bleach in the washer and run a rince wash (nothing in the washer) then run 3 more rince washes to clear out all traces of bleach before you put any closes in it,(or do a hot white wash only) this should work ok, when not in use all ways leave the door open if you can to change the air inside your washer it stops them smelling

Try buttons "dry" & "spin" together for a few seconds. This is the child lock display.

Or press "end of cycle" for over 5 seconds.

Or press "options & select" till the light goes off.

Works for other machines..............And please rate me if helped

it has detected a problem with the fill water as the official description of the "LE" is:

The washer has tried to fill but has not reached the proper water level. there can be several reasons for this to occur , the only one that the operator can ck is that the water supply to machine is connected and turned on , the others are a serviceman's call