20 Most Recent Apple iPod nano - Page 8 Questions & Answers

Try to download SOUNDHOUND APPS. it can help u look tht lyrics in there data base

If you have all the music from the Ipod on your computer, I recommend you do a factory reset of the Nano. You could have a corrupted audio file that is messing everything up or your hard drive could be failing.

When you connect your iPod to your computer, does the iPod itself change to saying Connected or Do Not Disconnect? If not I would recommend putting the iPod into disc mode. After it is disc mode you will need to restore the iPod using iTunes. Below is a step by step on forcing an iPod into disc mode as well as restoring. Please feel free to comment any questions or concerns.



--------------------------------------------------

Putting ipod into disc mode http://support.apple.com/kb/HT1363 Toggle the Hold switch on and off. (Set it to Hold, then turn it off again.) Press and hold the Menu and Select buttons for at least 6 seconds until the Apple logo appears. When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will change and say "Do not disconnect".

After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel and you will see information about your iPod appear in the Summary tab of the main iTunes windows.

Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download the latest iPod Software.

The 4 possible restore options are: Restore Option

1: Restore - Restores with same iPod Software version already on iPod. Restore Option

2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available. Restore Option

3: Use Newest Version - Restores with the latest iPod Software available. Restore Option

4: Restore and Update - Restores with the latest iPod Software available.

If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.

A progress bar will appear on the computer screen indicating that the first stage of the restore process has started.

When this stage is completed, iTunes will present one of two messages on screen with instructions specific to the iPod model you are restoring.
Restore Instruction 1: Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).


Restore Instruction 2: Leave iPod connected to computer to complete restore (typically applies newer iPod models).

During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage.

Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.

After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.

she has to rember the password. If she rembers the Username Do this.
1.Go to itunes.
2.Click the song you want to buy.
3. Then it will have a window open saying apple ID and password.
4.Type in the Apple ID.
5.Then click Forgot password
6.After you click that itunes will open a window called iforgot .
7.There you will give them her email address or the one she used when she signed up
8.Or you can change your password by asking your friend a couple security questions.
GOOD LUCK HOPE THIS WORKS FOR YOU.

Slide button at bottom of screen!

www.apple.com/itunes has the answer

iPad Volume Control How To Video Guide

hope this helps. http://manuals.info.apple.com/MANUALS/0/MA629/en_US/iPod_nano_4th_gen_UserGuide.pdf

sign in to itunes, plug in your ipod and reset from there

Connect cable, find ipod on itunes and add songs. Elaborate technical issues

http://manuals.info.apple.com/MANUALS/0/MA629/en_US/iPod_nano_4th_gen_UserGuide.pdf http://manuals.info.apple.com/MANUALS/0/MA185/en_US/iPod_nano_2nd_Gen_Features_Guide.pdf Here's two links, one for the 4th generation you said and one for the 2nd generation in the picture. Normally I would just plug my nano into my PC and use the search function to search for mp3s and just copy them to my computer, it's a tad easier than going through iTunes. The only problem is that the file names are all gibberish and you'll have to rename them for organization; use a batch renamer like Tagscanner, it's free.

look here for answer... Troubleshooting My computer won turn on

if you've had it for a while you must have a dead battery only way to fix it is to replace the battery(if that can be done)

iPod nanos do not support any third-party, non-Apple apps from the App Store and there's no jailbreak that allows unofficial apps to be added. You can only use the apps that come preinstalled on the device. Hope that helps!

You may have to get a new battery for it.

try an apps like soundhound. type the lyrics of the song and it will search on its database ... gud luck

code for ipod

Plug to a PC with internet connection