20 Most Recent Kodak EasyShare M853 Digital Camera - Page 8 Questions & Answers

Try to clean first the 3 metal contacts of your battery I Believed you are usign the recommended battery that came from the box (KLIC-7001). Now you may try to charged your battery Using 5V AC adaptor and also you can Turn it on using the Adaptor

Try using an electronics cleaner on the camera to dissolve and wash away any of the spilled drink. CLICK HERE for link for cleaners. Hopefully this will help!

the lens array has been damaged dude..you had either dropped it down or put it in you bag in switched on condition which should have forced the lens to get inside(resulting in damage).

please take your cam to the nearest service center to get it done, since it needs a pro and specialized equipments to calibrate to normal once it is opened..
if its covered under warranty you wont be levied on service charges, else it costs around 60$

If the AC adapter was over 5V The camera has suffered oOWdamage. Unfortunantly there is nothing else you can do than to have a TECH to fix the damage made.

KODAK charge: 48,44 pounds.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

1. When using the usb cord the camera has to be turned on.
2. Have you tried going to my computer to open it.
3. If your PC has a slot for the memory card, try using that.

Your problem is likely due to weak/worn out batteries or corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing into the camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with a dry cloth (heavy corrosion may require cleaning with a wire brush, steel wool, or sandpaper). Remove any residue that may have fallen into the battery compartment during cleaning, then wipe both ends of the batteries and place them back in the camera. This cleaning clears the problem about 90% of the time. If it doesn't work for you, your batteries may need to be replaced or the camera may require professional repair.

Lens problem, bring it to service center for lens re allignment

Your problem is likely due to worn out batteries or corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing into the camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with a dry cloth (heavy corrosion may require cleaning with a wire brush, steel wool, or sandpaper). Remove any residue that may have fallen into the battery compartment during cleaning, then wipe both ends of the batteries and place them back in the camera. This cleaning clears the problem about 90% of the time. If it doesn't work for you, your batteries may need to be replaced or the camera may require professional repair.

Your problem is likely due to weak/worn out batteries or corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing into the camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with a dry cloth (heavy corrosion may require cleaning with a wire brush, steel wool, or sandpaper). Remove any residue that may have fallen into the battery compartment during cleaning, then wipe both ends of the batteries and place them back in the camera. This cleaning clears the problem about 90% of the time. If it doesn't work for you, your batteries may be to weak/worn to properly power the camera, or the camera may require professional repair.

Hi,

When you look at the LCD screen, you would be able to locate the Battery symbol. There would be a rectangular box. You need to look that.Look at the pic below :-



The first picture refers to Complete Charge. The Second one refers, it is almost Finished and the Third one - It's about to Turn On - Immediate Charging required.

Let me know, if need further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

here is your camras website

http://www.kodak.com/global/en/service/publications/urg00745toc.jhtml?pq-path=11251/11289

Not sure of your model, but my Coolpix has a setting that controls picture color. Would be the same setting area as B&W.

Here are the steps:

1. Make sure you will install a new or fully charged battery/batteries into your camera.

2. Clean the battery contacts.

a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera

3. Without the memory card,turn on your camera.

If issue persists, call 1.800.235.6325 for repair.

Thanks.

Neerak21