20 Most Recent HP Deskjet F335 All-In-One InkJet Printer - Page 2 Questions & Answers

Are you sure in printing or copying?.. If its copying its CCD(scan head)faulty.. if you are getting in printing trailing cable faulty.(the cable carried data from the logic boar to carriage pcb)

Double check all doors/ rollers for small pieces of paper stuck in the rollers. Sometimes just opening the door in question and closing will reset the paper jam sensors. Paper jams can be smaller than your pinky finger nail. So double check,Comment if it still isn't working.

Go to File > Print Preview and at the top of the screen that pops up there is a place where you can bring up a drop down list which lets you choose shrink to fit as well as a wide variety of percentage increases or decreases. If this doesn't help go to File>Print> and then click on Preferences on the screen that comes up check your printers settings. Don't forget to look at what size paper the printer thinks you are using and see if your printer has settings for how many pages to fit onto the document. Let me know if this was helpful.

Hi, you can download the insallation drivers DRIVERS

http://www.siliconguide.com/drivers/device/614/
Download the driver for your model of computer. :)

Hi.

Below the driver download page for HP F4200:

HP Deskjet F4200 All-in-One Printer series - Download drivers

You can download the HP printer drivers from their supportWEB site. Please click on this link and select your model printer to download:- http://welcome.hp.com/country/us/en/support.html

Yes you should be able to. The drivers you will need if they are not already installed are at http://hplipopensource.com/hplip-web/index.html

You can download it from this link :http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=1128297#N221

and by selecting the operating system you are using.

So now you need to download the utilities from www.hp.com......the one you will need is the printer printing utilities ...this helps clear printing errors.....(Drivers and support should be what you looking for...)

Check both ends of the power cord (the end connected to the printer might not be in all the way).

Also check to see if the same outlet works for other electronics.

If not, then you have a problem with the outlet not the printer.

Hope this helps!

Normally all you have to do is have power on unit and have it switched on.
lift the whole top of machine up (from the paper tray upwards) its hinged from back.
As you lift up the inks move to the removal position.
You have to push down on front edge of cartridge and it unclips.

---

Please dont forget to vote if you liked my answer

thanks

------

You can check the 'run as administrator' on the options, or logon to the computer as the administrator, (the password protected account) download and run the program from there.

You should be able to get a free download at HP. Support

You need to install it

plse off your antivirus after install priter software try this

Here is the hp support page that you could read about blinking lights.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00859575&cc=us&lc=en&dlc=en&product=1128297&tmp_track_link=ot_search