20 Most Recent
Lexmark X3470 All-In-One InkJet Printer - Page 6 Questions & Answers
I dont have the drivers
What's the Operating System you have on your computer?. You can download the driver for this Lexmark X3470 Printer from the Lexmark website. Here's the link for the driver -
http://bit.ly/dt1YHI.Thanks.
I have x3470 all in one+ and I have mircosoft 7
I suggest not to plug the Lexmark X3470 printer to your computer yet. Check if your Windows 7 is running on 32-bit or 64-bit operating system by clicking on the Windows logo Start menu > right click on Computer > Properties. Then download the printer driver using this link:
http://bit.ly/d7Y8ft (for 32-bit) or this link:
http://bit.ly/cHOjVU (for 64-bit). Execute the file and follow the instructions on the software. Thanks for choosing Lexmark.
How do i install to imac?
From the manufacturer's web-site:
http://support.lexmark.com
enter 'x3470' and do a search.
Under the 'download' tab, there are no drivers for Mac OS.
So, either the printer is _NOT_ supported, or Mac OS _includes_ the necessary device-drivers.
Just connect it, and see if the iMac recognizes the hardware, and installs the correct device-drivers.
Screen says 'incorrect cartridge' Lexmark X3480
The only cartridge that fits in your printer is the 18C0788 #1 cartridge if you have put another cartridge into your printer that is not the #1 cartridge I recommend you remove it and replace it with the correct cartridge.
My lexmark x3430 printer and my computer want
If you have already tried turning off/on the printer, detaching and re-attaching the usb cable but still it didn't help, you might want to reinstall the printer driver. I recommend you detach the printer from your computer then uninstall the software. To uninstall, click on the Windows logo Start menu > Programs > Lexmark 3400 Series folder > Tools > Uninstall. Then restart pc. Also, check if your computer is running on 32-bit or 64-bit operating system by clicking on the Windows logo Start menu > right click on Computer > Properties. For the software, click on this link:
http://bit.ly/dckTwb (for 32-bit) or this link:
http://bit.ly/cIiFAH (for 64-bit). Download and install the software. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.
Hav x3470 an installed with 3400 series cd.prints
Yes, the installation cd has the All-in-One Center software. But, if you have already used that to install the software, I suggest you download the updated driver from the Lexmark website. Here's the link:
http://bit.ly/c9GW5Y. Choose the correct driver compatible with your computer's operating system. Download and install the software. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.
Says copier lid open
The small "sensor" that should "trip" when you close the lid is not engaging. Blow a little compressed-air into that micro-switch, so that it works correctly.
How do i change the language on my lexmark x4690
Unplug the power supply(the black box behind the printer where the power cord is attached). Hold down the Cancel and the Start buttons firmly while plugging back the power supply in the printer. Continue holding down the 2 buttons until Language Selection appears on the screen on the printer. Choose your preferred language. Hit Ok. Hope this helps.
Lexmark X3470 will not scan. OS Windows 7 Home
The scan software can only be installed using the installation cd that came with the printer. It's not included in the downloaded driver online. If you don't have it or you lost the installation cd, I suggest you contact Lexmark at 1-800-LEXMARK(1-800-539-6275). They will be able to send you one for free.
Not finding what you are looking for?