Frigidaire FEB27S5A Electric Single Oven - Page 8 - Answered Questions & Fixed issues

http://manuals.frigidaire.com/prodinfo_pdf/Springfield/316902214en.pdf

Try the liquid that mechanics claim to do all. WD-40.

cool down before it opens if you started the clean timer, f8 code, might be that its on a timer

possibly you accidentally pressed clean button

Let it cool down and Unplug for 5 minutes

Let it cool down if still hit and Unplug it for a few minutes.

F20 is a communication error between the display control board and the relay control board. Pull the oven forward and remove the back panel. Check the wire connections between the display board and the relay board. If the connections check good, replace the display control board

Most likely relay on board for that element is defective

Check bake element. It’s probably bad.

The communication between the oven user interface and the touch panel cannot be initiated.

reboot it or restart it.

http://manuals.frigidaire.com/prodinfo_pdf/Lassomption/318204143.pdf

Contact: https://www.partselect.com/Models/FES388WECA/ My FES388WECA Model Overview from PartSelect com

File a claim with your locale utility

You have a defective temperature sensor most likely.

Have you checked fuses? Otherwise the control switch or thermostat may have failed.

one of 2 things...depending on the version you the unit you have. 1. F0 & F1 EOC (Electronic Oven Control) failure Replace 2. F1 Circuit board defective Replace control board you can go here for parts and videos on it's DIY fix. repairclinic.com or appliancepartspros.com have the model# handy,

Good morning, try plugging the unit into a regular outlet. GFI outlets are notorious for tripping when used with large appliances. They are very touchy for safety reasons. A large current draw could be interpreted as a short and will trip. Hope that helps.

These ovens have notoriously bad control panel electronics. There is one control board for the oven that can be replaced or sent out for repair, $100 to $300.

Online website for manuals but they charge for monthly service or one time printout