20 Most Recent Jenn-Air SVE47100 Slide-In Electric Kitchen Range - Page 6 Questions & Answers

Warner's Stellian in St. Paul, MN for replacement. For cleaning DeBruce Polish is Odorless, Non-Toxic and non abrasive and perfect on stainless steel, glass cook tops, polished granite marble and more. DeBruce Polish is Odorless, Non-Toxic and Non Abrasive. DeBruce is perfect on stainless steel, glass cook tops, polished granite marble and more. We buy DeBruce at debrucepolish.com.

I had set the oven to clean and my husband came into the kitchen and thought is was on bake and turned it off. I tired to put it on clean again and it would not clean. He tried to set it on bake and the door won't close or the oven heat. How do we reset all of this. Thanks,

Most likely a clock board went out.
Jenn air oven repair in orange county, ca
appliance repair orange county, ca

use this web site link to find your parts

http://www.partselect.com/Entry.aspx?Brand=Jenn-Air&Appliance=Range&Source=GAWS&Term=Jenn-Air+Range+Parts

unplugging it for an hour will force a hard reset and may help this issue. if it does not then the controller brain is most likely bad and will need to be replaced. let me know if you have any more question. good luck

if u need just an electric burner 6" or 8" u could buy a whirlpool element it would work just fine take the part to a local parts place or if none available u could order like a mp15ya or a mp21ya or something similiar,, go to repairclinic.com and type those two part numbers in to see a picture .. then shopa round hope this helps

I used a long screwdriver between top of door and top of range. Used a flashlight to see the latch, then pushed the catch out of the way. Probably not the most appropriate way, but it worked!!

the led drivers on the main panel or burnt out you have to replace that whole circuit board

You've probably already read pages 34 through 37 of the owners manual for this oven. We had this stove in the house we bought and the owner wrote in his own directions, which seem to work fine:

1. Turn knob selector to clean.
2. Turn temp knob to clean.
3. Close and lock door.
4. Push enter button and turn dial clockwise to desired time.
5. Push enter button again.

You've probably already tried this, but just in case I figured I'd pass it along.

This is your ERC ( electronic range control) that has gone out on this unit. We are factory authorized Jenn-Air service and parts supplies and we LOVE the Jenn-Air brands. Our house is full of Jenn-Air appliances, also.

Please contact us at:

http://www.fixya.com/repair/d499389-accurate_appliance_repair_service and we can next day air the correct part to you first thing Monday so you can start cooking for the holidays!
We answer our phones from 7 AM until 9 PM CST from Monday through Saturday and look forward to helping you to get cooking again.
Thanks, Ella

HI...TRY TURNING ON ONE OF THE WORKING BURNERS AND LEAVE IT IN THE "CLICKING " POSITION AND TURN ON THE BURNER THAT DOESNT LIGHT.DID IT LIGHT?IF SO YOU WILL NEED TO REPLACE THE SPARK SWITCH WHICH IS LOCATED BEHIND THE KNOB.IF NOT SPARK MODULE IS BAD.HOPE THIS HELPS.PLEASE RATE MY RESPONSE :)

you need to get a new heating element to replace your old one. this is classic for ovens with faulty or damaged elements. an appliance store would be able to source one for you, or you could contact the company direct (jenn-air) for a new heating element.
they replace very easy, usually plugged into the oven so just need pulled forwards and unclipped from the top

yes the serial number has the date code on the first 2 letters, but you have to have the maytag code to know how to read it. if you post it here i can look it up for you.
if it looks like perfect condition, yo might be able to sell it for around $150-200 dollars. used ranges are not in high demand and so they wont bring much money to sell them used.

This is one of the most simple repairs you can make on your range. And it's so affordable that you shouldn't think about replacing it!!

Just contact us at:

http://www.fixya.com/repair/d499389-accurate_appliance_repair_service
with your complete model number and we provide part removal/installation instructions for you when you purchase your parts through us.
We want to get you cooking again soon, so call us asap.
We look forward to working with you! Thanks, Ella

you may have triped half your 220v breaker. (you should have shut it off when reparieng wire or it would have been live and zaped you) Or something in line with the wire that shorted blew out like a fuse in the range.

are you still getting power to the oven? breaker ok? there may also be a fusible link somewhere on the circuit