Jenn-Air JGW8130A Electric Single Oven - Answered Questions & Fixed issues

put dynamite in container. if it blows up, too bad

Jenn-Air... | Answered on Oct 07, 2018 | 849 views

F9 Door lock safety circuit on the power relay board sensed Recommended to replace power relay board

Jenn-Air... | Answered on Oct 02, 2012 | 139 views

F1 on this unit means that the door latch and or the controller has failed.... you sometimes can turn the breaker off to unit and turn back on and it willl reset... most likely though it will require replaceing the control board... these units get so hot on self clean and as a servicer it is what keeps us busy.... f1 can mean three things a bad door latch mechanism, bad control board or the ribbon cable on the touch pad itself has failed and requires replacement of the touch pad... most of the time it ends up being the control itself and some of these models when you order the control it comes with a new door latch mechanism... turn power off and try that first if no cure then order parts from appliance repair or a reputable online store like then hit the parts direct link up top of page and enter your model number wish all the luck to you....

Jenn-Air... | Answered on Feb 13, 2011 | 97 views


If your electric oven is taking too long to heat or just not heating up right, then check out this tip that will give more detail about your problem.

Oven Problems Electric Oven is Heating Slowly or Poorly


Jenn-Air... | Answered on Jan 20, 2011 | 409 views

normally pressing the clear/off button for three to five seconds will cancel the cleaning cycle

Jenn-Air... | Answered on Jan 19, 2011 | 37 views

We are getting rid of this oven - I killed it. I have the manual for it. If you want it, please let me know - it does give instructions on how to remove the door. Please contact me via my contact page through my website at - if you want the manual.

Jenn-Air... | Answered on Nov 28, 2010 | 557 views


IF you can locate the model number tag (bottom left of door opening) you can look up the manual at

The only button on your stove that should make the door lock would be the clean button (self clean model) if that is pressed simply hit the clear/off or cancel key and wait for the door to unlock.

IF the self clean option ran for an hour or so, you will have to wait for the oven to cool down before the lock can unlock (safety feature)

Thank you and thanks for using fixya

Jenn-Air... | Answered on Sep 29, 2010 | 342 views

Someone else had this problem, and it turned out to be the high limit switch (a relay) that had burned out. Here is what they said, quoted from

Our oven was doing the same thingwe tried flipping the breaker but it didn't help. After that we unbolted the whole unit from the cupboards, pulled it out and removed the panels. the problem is a relay switch on the back of the oven which keeps it from overheating, this was burnt out. We got the part from a local appliance repair place for $14.00 and replaced it ourselves.

I have to run an errand now, but will try to get back with a diagram and parts list for your oven.
For now, hope this helps.

Jenn-Air... | Answered on Aug 25, 2010 | 81 views

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.

Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Jenn-Air... | Answered on Aug 17, 2010 | 55 views

Hello there:
if this is the newer style oven then follow the gujide i have provided below and if it is a older style follow the guide i have provided below the first one ok

newer style
F1 Power to element relay energized during time of day display Wiring harness shorted or change power relay board (PRB)

Note: for double ovens, change second oven board

older style
F1 Defective touch pad or membrane Replace touch pad or membrane (this problem is usually the touch pad)

Jenn-Air... | Answered on Jul 25, 2010 | 244 views

The part is AG200. Don't know where to find it.

Jenn-Air... | Answered on Jul 10, 2011 | 234 views

Turn off the house breaker to the machine for about 15 minuts and turn it back on and see if it releses the door. or unplug the machine for the same amount of time.

If this does not work then your Oven latch may be bad. I looked up your latch and it is a motor drive latch.

One more thing that could be bad is the TOC or sometimes call the High limit thermo fuse.

Jenn-Air... | Answered on Jan 07, 2010 | 86 views

HI There
I have this code for you to read and this is helpful. Let me know how it goes.
F1 Defective touch pad or clock (ERC) Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information.Thank you for writing to fix ya.
Best Regards Richard

Jenn-Air... | Answered on Jan 07, 2010 | 241 views

F 9 IS DOOR LOCK SAFETY circuit on power relay board sensed / ckeck/repair replace power board .. hope this helps mm

Jenn-Air... | Answered on Dec 08, 2009 | 178 views

You can disconnect the beeper so its not so annoying. turn oven off at breaker first. pull out oven a little so you can get at the top 2 screws on each side. The speaker is between the boards on the display module.
look for a red wire connected to a gold disc like speaker. remove this wire and you won't hear the beeping anymore.

Jenn-Air... | Answered on Oct 06, 2009 | 1,021 views

how to installation the car amplifier

Jenn-Air... | Answered on Oct 03, 2009 | 116 views

just scroll down on this e mail and in the comment box you can answer my question

Jenn-Air... | Answered on Aug 19, 2009 | 917 views

F7 means Function key shorted Replace touch pad

Jenn-Air... | Answered on Aug 16, 2009 | 455 views

This simple test will help determine whether the ERC (Electronic Range Control or Clock) or the touch pad is defective when F1 error code is present.

Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not necessary. Simply replace the ERC (Clock).

Warning: If you feel in any way uncomfortable performing this test or making this repair, please contact a qualified appliance repair technician.

1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing.
2. Gain access inside the control panel.
3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.
4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.
5. Turn the power back on.
6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound).
7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.

Jenn-Air... | Answered on Jul 28, 2009 | 289 views

need model number and ill tell you how to open mod number prob at pull out drawer

Jenn-Air... | Answered on Apr 01, 2009 | 416 views

Not finding what you are looking for?
Jenn-Air JGW8130A Electric Single Oven Logo

50 questions posted

Ask a Question

Usually answered in minutes!

Top Jenn-Air Ovens Experts

Cindy Wells

Level 3 Expert

6073 Answers

Nathan Van Boven
Nathan Van Boven

Level 2 Expert

206 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Jenn-Air Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides