20 Most Recent LG RH177 DVD Recorder/HDD Recorder - Page 4 Questions & Answers

You can find the answers to this and most other configuration questions in the manuals located at the link below:

http://www.lg.com/uk/support/product/support-product-profile.jsp?customerModelCode=RH177#

i want to copy from the hdd to dvd but what i want to copy is to long for one dvd at good quality can i record to more than one disk. lester

Hello,

the cost is between $160 to $200. Price varies, depending on the seller.

Regards.

Replace all power supply's capacitors that are on the secondary.

This should fix the problem.

and you cant find one??

go to dvd set up then scroll dow to lock then push 0 seven times

Please check the read surface of the disc you have already played on this player. Are there circular line on the surface. Best is to remove the top cover and observe if any foreign objects like sticker or paper is lodged in the loading tray. Also play with the sound off and see where the sound is coming from.

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_fg87j9

This device can tune in the digital channels, just that it can't decode them because it doesn't have an ATSC decoder in it.
Sorry, there is no way you can change that - you can't modify the mainboard to install one. All you can do is to buy an external convertor box and attach it to the AV inputs of the LG and set it to record from there. Something like
http://www.amazon.co.uk/Labgear-Freeview-Digital-Receiver-Modulator/dp/B002IWY51I/ref=sr_1_4?s=electronics&ie=UTF8&qid=1298283638&sr=1-4

http://download.cnet.com/WirelessKeyView/3000-2092_4-10614187.html Download and run, and enjoy your internet! Just make sure you're in range of the router in question.

Hello,

how long have you been using this player? Does the DVD recording play before now? And does it format disk?
If the answer is yes, then I don't think it is a driver(s) problem.

I suspect the laser (lens) of the player. I think the laser (lens) is weak that's why it cannot read data/files on DVD discs.

To confirm if actually its a laser problem, insert an Audio CD into the player and see if will play. If it plays, then obviously, your laser (lens) is weak. But if it doesn't play Audio CD, then it might still be the laser (lens) or a mechanism problem.

Get a lens cleaner, use it to clean the lens. If that doesn't solve the problem, get a screw driver, open the player's cover so that you can gain access to the lens, use a cotton board to clean the surface of the lens. This should clean dust or dirt that might be on the lens.

If non of the above solves the problem, then know that you need to replace the laser to a brand new one.

To replace the lens, remove the bad laser, use it as a sample to get exactly the same type and do the replacement. Note that replacing a laser (lens) needs a professional touch, so if you cannot replace the laser, get it to a repairman to fix it for you.

Once this us done, your player will play all DVD discs again.

Good luck.

Your DVD drive is having a problem. When this recorder starts, it checks the DVD drive for correctness. If incase your DVD drive is has problem in the ejecting mechanism then this will prevent your HDD from working correctly. Take the player to service center and fix the drive

Hi.

First test to see if this is happening with a particular DVD. Also go to sound settings and tes with different settings (test 5+1 if you have this configuration, and thest two speakers stereo in any case).

If problem occurrs with any DVD played, check the Center Speaker audio connection and working status. With surround settings the voice is often sent mostly to the center speaker. If speaker is malfunctioning you may get no or low voice audio signal.

hi,
can u explain the problem in briefly. the only u will get a better solution
ok

Could be a timing issue with the tray mechanism - possible that somebody has given the tray "a shove" to make it close instead of using the open/close button and has put the timing out.or a worn tray loading belt

hi,
try the following to make ur dvd playre region free.

p { margin-bottom: 0.21cm; }

1.Power ON

2.Eject Tray in DVD Mode

3.Press "0" seven times

4.Enter "0" as New Region Code

5.Press Enter

ur player will become region free

ok

Hi,

Try the below 2 tricks to make it region free :-

Press Setup
Scroll to Lock
Press 0 (7 times)
A message will appear saying it is region free.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

No, you can't load them. You can do something else: copy the movies on an USB stick, plug the stick on the LG and play them from there.

You can find out by testing it, no harm done. But Its not guaranteed.

1 Use the remote
2 Press HOME
3 Move to SETUP
2 Scroll down to LOCK (no need to enter LOCK options)
3 Press '0' seven times
A message that confirms that the player is region free will appear on the screen!

it has been reported to work on some LG models.