20 Most Recent
Gaggia Titanium Espresso Machine - Page 5 Questions & Answers
No matter what I do the Gaggia Titanium espresso
HI
If the brew unit is in the wrong position when inserted you can knock the lever off the microswitch in the back. If the lever is knocked off you will never get the brw unit miss message to go away. You will have to take the machine apart and replace the lever on the microswitch. Sorry
We made a modification to the brew unit that would prevent this from happening. We modified all the brew units on the compact machines before sending them out so we would never get them back for this reason.
Gaggia Titanium machine computer control malfunctioning
AN EXPENSIVE ELECRONIC MACHINE LIKE THIS ONE IS REQUIRED TO BE PLUGGED IN INTO A DEDICATED OUTLET WITH ITS OWN CIRCUIT. BROWN-OUTS, SPIKES, UNDER-VOLTAGES COMMONLY PRESENT IN ANY HOUSE WOULD CERTAINLY AFFECT THE MACHINE SENSITIVE POWER SUPPPLY AND ONCE IT FAILS THEN THE MOTHER BOARD , TOO.
No water coming out
- is the machine ready to use?
If so:
- Does the pump work?
if so:
- Does the tank give water (bubbles)
if so
- is the brewunit clean
- machine not ready => electrical heating problem
- pump broken => no sound
- watertank => valve stuck
- brewunit => stuck/constipated
Dregdrawer missing message won't go away
The dregdrawer is connected to a button/switch inside the machine.
- Switch broken.
- dregdrawer wrongly placed.
- dregdrawer is broken. (projection which goes into te machine is broken)
How to stop it from tripping the breaker
It's probably pulling more amps then the circuit breaker can handle. Try plugging it into a different plug or unplug something that's on the same circuit that you move the machine on. if that doesn't work there's a short to ground somewhere in the machine.
Not finding what you are looking for?