20 Most Recent Casio QT 6000 Point of Sale Terminal Questions & Answers

Mode PGM 3 Clerks pick the clerk you want to use Put you new name in the the description you might need a number them ESC all the way out now Mode REG job done

http://totalpos.co.nz/wp-content/uploads/2012/10/QT6000REF_E060915D.pdf

Hi. It is a printer error. Check printers and connections. --------------------------- For those who have been asking, one of the users has the Casio QT-6000 manuals here: https://the-checkout-tech.com/manuals/cashregisters/Casio4.php

you can reset the time and attendance with in Z mode reset the table and all should be ok

You are signing on the wrong operator. Sign on the person who started the sale originally.

This should not be necessary during normal use. It is more likely that the touch panel has a fault or a scratch/ hole in it causing failure. Firstly, check that there isn't a build up of filth at the bottom of the touch panel which can interfere. 90 percent of the time it is a failing touch panel, sorry :(

would that be master/backup master down?? if it is Mode Manager number 11 reconnect yes yes yes should pop up within 3 seconds and all should be ok

Moden button, what is the Moden button?? more please

reset the tables in z

hi
i have found the users guide avalible at the link given below. The error code e105 is listed in the troubleshooting section at the end of the document. Maybe this may be of some help to you?

www.casio-europe.com/fr/downloads/manuals/ecr/qt6000.pdf

I am not personally familiar with this product, but i have located a manual that details basic and advanced programming features for your model.

Right-Click the link, and select " Save As " and save it to your desktop or other useful location.

(PDF)Casio QT-6000 Manual

mode PGM1 enter new time 24HR clock 0900 / 2100 press X Date Time button esc esc mode REG

dont do it

Mode button is very important to change the mode.If you have delete it by mistake then you have to use Casio software- cv-10, cv11 or cv33 to download all the programme and initialize qt-6000 with initialization method and reload individual programmes which you need and don't load function keys through your saved programme. Then configure the function keys manually in programm-4

1. Press [Mode]
2. Press [X/Z report]
3. Press [Daily Z]
4. Press [E-Journal]
5. Press [Reset Only]
6. Pres [Yes] to reset it.