20 Most Recent Samsung Digimax D53 Digital Camera - Page 2 Questions & Answers

I have used Kernel Recovery for Digital Media software, It is advance and effective photo recover application. You can use it. Get detail http://www.digitalphoto.freedatarecoverysoftware.org/

The only thing you can do to restart a camera, is remove the battery and eventually, when it is out, you can recharge it. When you replace the battery, the internal program will start from scratch. There is no such thing as a reset button. It is not a PC. Most camera's allow you to set back the settings you made till a certain grade. things like the language and time and date will always stay in the memory as it is.

Do you have a memory card in the camera? The camera won't let you see the internal memory if a memory card is installed.

you have a defective ribbon (broken) wire connecting the internal lens that is why you are getting greenish lines when taking outdoor shots or too bright subject.

the ribbon wire connecting to your (internal) camera lens is broke and needs ribbon wire replacement, that's the reason why you're getting an over exposed on outdoor shots, sometimes indoor shots too depending on the indoor lightings, you need to look for a competent digicam (service center) technicians.

Hi there
Take the card out and unlock it, it will be at the side of the card like this .
Good luck and thanks for using Fixya!!

There is no reset button. You can normally reset the camera by turning it off and on again. There is a Reset command in the Setup menu, which will reset some but not all camera settings.If all else fails, remove the batteries, wait a minute or two, then replace the batteries and turn the camera on.

There is no reset button. You can normally reset the camera by turning it off and on again. There is a Reset command in the Setup menu, which will reset some but not all camera settings. If all else fails, remove the batteries, wait a minute or two, then replace the batteries and turn the camera on.

There is no reset button. You can normally reset the camera by turning it off and on again. There is a Reset command in the Setup menu, which will reset some but not all camera settings.If all else fails, remove the batteries, wait a minute or two, then replace the batteries and turn the camera on.

Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Windows Photo Gallery or Picasa.

Needs shop repair, no user fix.

This needs to be looked at by tech, no home fix.

Harry this sounds like you have the wrong memory card for your camera. Check your user manual to see what cards are compatible.

Try these procedures.

Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

In most cases the Camera's Screen is dying. Usually it worth buying a new camera and that's all.

Battery uncharge or lens clogged.