20 Most Recent Asrock P4i65G Motherboard - Page 5 Questions & Answers

 Look in the manual for your model:

Link to your manual:
http://www.asrock.com/mb/manual.asp?Model=P4i65G&s=478

deriver ASUSTeK Inc. P4B 845 mainboard audio ou grafiq mercu

Chipset - Northbridge: Intel® 865G
Graphics - Integrated Intel® Extreme Graphics 2
- DirectX 8.0
- Max. shared memory 96MB Audio - Cmedia 9761A 5.1 channel audio CODEC
For Graphics drivers go here: http://alturl.com/97x
For Audio go here: http://download.driverguide.com/driver/9761a/C-Media/d1283775.html

f updating the driver does not resolve the problem, it indicatesthat there is a problem in the registry. To fix this problem, you mayhave to remove a few keys from the registry.Note: Be careful while working with the registry editor becausechanges done to the registry using the Registry Editor are irreversibleand mistakes can leave you with more problems than when you started.Therefore, it is recommended that you make a backup of the registrybefore proceeding with the changes.
After you have removed the registry keys listed below, you willhave to reinstall all applications that you use for CD or DVD recordingto make them work properly.
To fix the error by editing the registry, perform the following steps:

1. Exit and close all applications currently running on your PC.
2. On Start > Run type Regedit and press the Enter key.
3. Next, navigate to the following registry key:
   HKEY_LOCAL_MACHINESYSTEMCurrentControlSet ControlClass {4D36E965-E325-11CE-BFC1-08002BE10318}
4. Delete any of the following registry entries if they exist under this key:
   • LowerFilters
   • LowerFilters.bak
   • UpperFilters
   • UpperFilters.bak
5. Restart your PC and open My Computer to ensure that the CD-ROM drive is visible.
6. Also, open the Device Manager again to ensure that the yellow exclamation mark and the error code is now gone.
7. Restart your PC and open My Computer to ensure that the CD-ROM drive is visible.
8. Also, open the Device Manager again to ensure that the yellow exclamation mark and the error code is now gone.

Preventing System Errors
To prevent frequent system errors on your system, you must take care of the following:

• Be a vigilant and aware user by being careful about the websites you visit and the email attachments you open.
• Do not visit dubious websites and do not open attachments that come with unsolicited mails.
• Implement antivirus and antispyware programs on your system, keep them updated, and run them regularly to prevent any malware infestation on your PC.
• Keep your operating system, device drivers, and installedapplications updated with the latest patches and security updatesreleased by their manufacturers.
• Use system utilities included with your Windows system to perform regular system maintenance.
• Use a good registry cleaner such as RegGenie to regularly scan and fix registry problems.

sound's like a driver problem

use *********** board cd driver and install your sound program

The best place to download drivers is the manufacturer's website. The AsRock website download page for this motherboard is here:)

http://www.asrock.com/mb/download.asp?Model=P4i65G

Specifically, the VGA driver for Windows XP is here:)

http://www.asrock.com/mb/download.asp?Model=P4i65G&s=&T=D&ID=194

You don't say what case you are using. If it is proprietary and the front panel header is all in one connector, you can carefully back the connector pins out of the block using precision screwdrivers. I keep a bunch of two pin connectors from junked machines so I can create individual connector sets when changing motherboards (eg, PWR SW, PWR LED, HDD LED and RESET). This also requires that you know the pinouts of both the old board and the new one so you can get everything connected properly.

Very doubtful you will ever find an adapter to change from one front panel block to another.

The 9-pin connector probably uses a spacer pin between the legs of the PWR LED, while it seems the 6-pin does not have RESET.

real asrock mobo told ,just the intel chipset code H110the bios controls that in bios disable iGPU. no cpu told either as some have no igpu at all.like xeons, and some mobo can run both i3+ and zeons.see this search at asrocksee how your post has no real clues?https://www.asrock.com/support/index.asp?Model=h11029 mobo made based on only intel chipet.

double posted you?of 29mobo not one told.https://www.asrock.com/support/index.asp?Model=h110the bios page,labeled, igpu (disable /enable ) is there.some mobo allow zeon here with zero igpu.but not yoursthey make h110 ,mobo just for useless now, bitcoin mining.watch the netflix movie how the blocked mining,then save moneyalso learn what ROI is?

Check Ram and fun if not properly installed

First of all, check if there are any inflated capacitors, if there is even one- ditch MBO, other capacitors will soon follow. If no inflated capacitors proceed with these diagnostic steps: 1/ disconnect all peripherials (DVD, HDD, card reader...), leave only MBO, PSU and RAM (and CPU of course); if nothing happens 2/remove CMOS battery (CR2032) for 20-30 sec with power cord disconected from computer, that will reset BIOS; 3/ take out RAM sticks, then, if you have more than one stick, try with each stick separately (it might be faulty RAM); 4/power on MBO without any RAM-if speaker is present it should give BEEP signals; 5/ try with different PSU, many power supplies are faulty even when they do give power to MBO. If nothing of above does not help than you have faulty MBO, because CPUs are so rare to fail that in my 10 years of experience in PC service I had 3-4 fried CPU-s, and even that was because costumer tried to clean PC, removed CPU cooler and than incorrectly placed it back or didn't put thermal paste afterwards.

3 post all the same mobo and all 3 same reasons. and all 3 same answers. zero no I added one, coin cell is dead at 7 years, you are 2004 to 2018 late to the party. 14 year old battery is 2 times spec life. for sure.

http://drivers.downloadatoz.com/download/76103,compaq-nc4200-intel-vga-driver.html maybe.

Wipe the hard drive and do a clean install, not repair.

swapping out parts, try with different power supply pull the ram reseat it maybe one at time. different memory slots. change one part at a time with good working part, never assume any part is good.

That would be ******* and we don't so that here. Sorry.