20 Most Recent Asrock P4i65G Motherboard - Page 2 Questions & Answers

AsRock Support > P4i65G > Main Support page,http://www.asrock.com/mb/Intel/P4i65G/In the top left column under the green AsRock name, click on - Manual in the list.To the right of - User Manual - click on the country NAME nearest yours.When the PDF file comes up........Hover your mouse cursor at the bottom. The ghosted out navigation guide will appear.Go to the far right, and click on the Adobe PDF icon.(When you hover your mouse cursor over it, "Show Adobe Reader toolbar" will briefly appear)Click on the Zoom Out icon ( - ) at the top, to Decrease the view size.Use the Zoom In icon ( + ) to Increase the view size.The Adobe Reader page number box, is to the right of the Down Arrow, at top.Page 9 shows a Motherboard Layout, and the jumper locations.Page 15 has the details about the jumper settings.Motherboard installed in computer case;A) At the Top/Left corner is PS2/USB/PWR1 jumperThere are 3 pins.Starting on the LEFT side going towards the Right;Pins 1, 2, and 3.Jumper cap on Pins 2 and 3 for +5VSB+5 Volt StandBy power.It is for PS/2 or USB Wake-Up events.Suggest leave on Pins 1 and 2.B) To the Top/Left corner of the top white PCI slot, is the JR1JL1 jumper.4 pins going across. From the LEFT side going towards the Right;Pin 1 and Pin 2 for JR1.The next two pins are Pin 1 and Pin 2 for JL1.If there is a jumper cap on those pins, your Front Panel audio ports, and Rear panel audio ports will not work.(JL1 = Front Panel JR1 = Rear panel. The rear panel is also the I/O area. Input/Output. Where the mouse, keyboard, monitor, etc hook up)C) Right below the round CMOS battery on the right side, is the CLRCMOS0 jumper.Clear CMOS jumperNO jumper cap on those 2 pins to operate the motherboard."CLRCMOS0 allows you to clear the data in CMOS. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters.To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from power supply.After waiting for 15 seconds, use a jumper cap to short two pins on CLRCMOS0 for 5 seconds."Regards,joecoolvette

Hello here is no drivers for windows 7:http://www.asrock.com/mb/Intel/P4i65G/?cat=DownloadGood luck

Hello the homepage is here: http://www.asrock.com/mb/Intel/P4i65G/?cat=Manual3 short beeps: base 64 k ram failure.If you've recently added or tried to add additional memory to the computer and have started getting these beeps. Remove all new memory you've added to the computer. If the computer works fine after removing the new memory you're encountering either an incompatibility or defective new memory.Read more here:http://www.computerhope.com/issues/ch000996.htmBeep codes:http://www.computerhope.com/beep.htmThe fault could also be: power supply, or bad capacitors on the mainboard.Good luck

Hi, As per the manufacturer, the motherboard is not made to support windows 7 and some of the drivers may not work correctly. The complete list of drivers are given on the link below http://www.asrock.com/mb/download.asp?Model=P4i65G&o=XPAs the video controller on the motherboard , is very basic ,it should be picked by windows 7 as default . Incase the same is not working you can try upgrading the motherboard software from the link below.http://www.asrock.com/mb/download.asp?Model=P4i65G&o=BIOSIf the above steps donot resolve the problem, either invest in new board, though it would be expensive but you would have and upgraded system for next 5 yearsOr Invest in an add on video card that supports windows 7. Which will be around $30 to $50.RegardsProton

Max. capacity of system memory: 2GB Supports DDR400/333/266 non-ECC, un-buffered memory

if you dont have a disk with the drivers you will have to download them

http://www.boxdrivers.com

using this link you will be able select your drivers http://download.cnet.com/Realtek-AC-97-Driver-Windows-98-Me-2000-XP-2003/3000-2120_4-10238712.html Realtek AC'97 Drivers & Applications. The package includes: Driver/Application Setup Program; RtlRack for Win98/Me/2000/XP and AvRack for Win95/NT4; Realtek Sound Effect Manager. DirectX 8 is required to enable advanced features.

http://download.cnet.com/Realtek-AC-97-Driver-Windows-Vista-Windows-7/3000-2120_4-10962344.html

http://download.cnet.com/Realtek-High-Definition-Audio-Codec-Windows-Vista-Windows-7-32-bit/3000-2120_4-10788600.html free sound drivers Realtek HD audio driver package. The package includes: driver setup program, drivers for Vista 32-bitedition.http://download.cnet.com/als100-windows-sound-driver/3000-2120_4-10053066.html if these arent right you will find free sound drivers http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for (be precise)but don't use numbers or / - also the download software finder under that there will be a list place a tick in the box of any one you want/need hope this will help you

if you dont have a disk with the drivers you will have to download them

http://www.boxdrivers.com

using this link you will be able select your drivers http://download.cnet.com/Realtek-AC-97-Driver-Windows-98-Me-2000-XP-2003/3000-2120_4-10238712.html Realtek AC'97 Drivers & Applications. The package includes: Driver/Application Setup Program; RtlRack for Win98/Me/2000/XP and AvRack for Win95/NT4; Realtek Sound Effect Manager. DirectX 8 is required to enable advanced features.

http://download.cnet.com/Realtek-AC-97-Driver-Windows-Vista-Windows-7/3000-2120_4-10962344.html

http://download.cnet.com/Realtek-High-Definition-Audio-Codec-Windows-Vista-Windows-7-32-bit/3000-2120_4-10788600.html free sound drivers Realtek HD audio driver package. The package includes: driver setup program, drivers for Vista 32-bitedition.http://download.cnet.com/als100-windows-sound-driver/3000-2120_4-10053066.html if these arent right you will find free sound drivers http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for (be precise)but don't use numbers or / - also the download software finder under that there will be a list place a tick in the box of any one you want/need hope this help you

Hi you can download your driver on the link below hope it helps thanks.http://www.asrock.com/mb/download.asp?Model=p4i65g

click start control panel hardware and sound manage audio devices playback you might have to set a default go for via high definition audio then right click on speaker you might have to configure them then select properties you will see tabs general level in this tab make sure your setting are loud enough also enhancements and advanced from the drop down list in the advanced tab select dvd quality or another then apply hope this helps

Hi, you can download a manual here:

http://www.asrock.com/mb/overview.asp?model=p4i65g

Your mainboard DOES NOT SUPPORT ECC RAM.
This ram type is ONLY intended for servers
or mainboards that are compatible for that ram type.

This is what your mainboard supports:

Dual Channel DDR memory technology
- 2 x DDR DIMM slots
- Supports DDR400/333/266 non-ECC, un-buffered memory
- Max. capacity of system memory: 2GB

Use only the asrock site when upgrading the bios.
And a bios upgrade does not supports the ecc ram anyway.

Hope this will help you.

Is it USB? Probably need to enter the BIOS and turn USB on, and often there's a setting for "Use USB Keyboard"

This is fault in your Ram, hdd, I/O device or pci slot cards, check all these things are connected properly with your motherboard.These beeps are also due to some faulty in connection betweeen i/o devices like keyboard or mouse and mother board.in advance system if hardware, rams, hdd and io devices not conneted properly then systen don't boot.you have to check ram, keybord, hdd and pci slots card to solve this problem.

Hi,
Go to the site
http://www.asrock.com/MB/download.asp?Model=775i65G&o=XP

and download the drivers.

Thanks for using FixYa.

you could run the chkdsk utility click start run type cmd then type chkdsk/r/f which will scan for and attempt to repair any bad sectors and automatically fix any corrupt files on your hard drive another way of running the chkdsk utility click start control panel administrive tools,computer management ,disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now,start should schedule this task when restart do not do anything while the chkdsk utility is in progress any input may damage your computer restart your computer then try reinstalling the sound drivershope this helps

SHOULD BE A PROBLEM WITH YOUR SMPS. PLS CHANGE IT AND TRY

That motherboard only supports up to DDR400 and max of 2gb total. Because the board does not support this memory, your lucky it hasnt shorted out and fried your entire system... Do a little research before you just go tossing memory into a unit, Id return it to bestbuy where you entirely overpaid for it and buy DDR400 off of either newegg or tigerdirect...

When looking at the motherboard, position yourself so that the RAM slots are running vertically on the right side of the board. The PCI and AGP slots should be running horizontally on the lower left side of the board.

In the bottom right of the board, you will see a block that has 9 pins, a row of 4 on the top and a row of 5 on the bottom.

The middle pins, one above the other, are the power button connectors. Insert your PWRBTN# on the top and the GND wire onto the botton pin.

please follow and download to the below link.


http://www.asrock.com/mb/download.asp?Model=P4i65G



Say "Thanks" by clicking the thumb icon in the post that helped you. Please click "YES" in solution that solves your problem as "was this helpful?"