20 Most Recent Asrock 775i65G Motherboard - Page 7 Questions & Answers

Well if you reinstalled the operating system you need to install the drivers for all the hardware that is on the motherboard, You need drivers for, chipset, Graphic's, sound, lan, If you go to the website
of the maker of your motherboard they will have all the drivers you need.

use this link

http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=948&OSFullName=Windows*+XP+Professional&lang=eng&strOSs=44&submit=Go%21

and download the inf for chipset and the VGA driver first install the INf then the vga

Please use this link


http://www.asrock.com/support/Download.asp

Depending upon what is your processor AND the OS you are using, The motherborad drivers are available at this link:http://www.asrock.com/mb/download.asp?Model=775i65G.
Go though it carefully and select the most compatible or appropriate for your system. Download and upgrade anything even its BIOS update,if any,................sodeep

Have you used RAM with the same FSB rating? It might accept it if the FSB rating is higher, but if its lower then it will only recogonize the earlier one. Also try swapping your existing RAM to the other slot. If that works then the DIMM slots are OK, only match the FSB's.....sodeep

If u want to search drivers urself so go to below link and put ur motherboard model no in srearch box..u will get ur drivers..

If not so give me correct model no. of ur Motherboard..i will give u drivers link

http://www.asrock.com/support/download.asp


if it work RATE me if not pls reply me
thanks
bye

Restore to a time when you had everything working........sodeep

RAM not seated properly.....sodeep

You must try to clean contacts on memory modules by alcogol and fabrics.

On cpu three beep no disply ihave change ram but

Below the download page for ASRock 775i65g

ASRock Motherboard - Product - 775i65G - Download

Todos los conductores están disponibles desde ASROCK sitio. aquí es el vínculo

http://www.asrock.com/mb/download.asp?Model=775i65G

ok im currently working on a motherboard right now and change your power supply make sure its 400w or higher

If this happened on three supplies, the trouble has to be in the motherboard connector. Probably one of the pins is corroded or very loose and causing a poor connection. The resulting heat is melting those connectors. You would be best off replacing the board since you don't know if other problems may be waiting to occur. A replacement would probably cost around $50 to $60.

I would venture to say one of the memory modules you have is bad..

Your onboard video might not be working. I suggest getting a Video card and installing that. If onboard video is a must have then you can buy a low video card that fits your mobo, then search online for your mobos onboard video driver and then your onboard VGA should work.

is your speaker is working properly??
is your soundcard driver install??

maybe you need to re-format your system

You have a video driver conflict
Check which video card is in your computer.
Use pc wizard (download) install check which driver you need name and number
EG cmedia 2341 Drivers type into search bar and download correct driver

real asrock mobo told ,just the intel chipset code H110the bios controls that in bios disable iGPU. no cpu told either as some have no igpu at all.like xeons, and some mobo can run both i3+ and zeons.see this search at asrocksee how your post has no real clues?https://www.asrock.com/support/index.asp?Model=h11029 mobo made based on only intel chipet.