Top 20 eMachines E442 E442-v133 15.6" Notebook Amd V140 2.3ghz Cpu 2gb Ram 120gb Hdd W7 Questions & Answers

There is a button in ur keyboard for projector / TV press the button and your screen will come. You may have to press the function key and that button together. That button usually stay with the F keys

You may need to hold down the "fn" key (near the windows logo key) while pressing F5 to get the function key to work as you want it to.

Click Start > Go to Store > Search there Drivers.Hope I helped.

Turn on your computer and locate the Wi-Fi icon. This could be located on the upper row on a laptop it will have the radiation look (((•))) Make sure its pressed on. Usually a wifi enabled phone, computer, or whatever device, will recognize if there is wifi access near you. If not you may need to turn on the wifi on those devices. Usually those setting can be found in menus like Network Settings. Once it recognizes the network you will need the password if it is required. Just enter that in and you are set. Where you enter the password is usually in the same menu in which you turned on your wifi enabled device. if still no connection Power on the laptop computer and wait for the operating system to boot. Right-click the wireless Internet icon in the lower right corner of the desktop. This brings up a new pull-down menu. Select "View Available Wireless Networks." This brings up a selection of different possible Internet connections that are in range of the computer. Select the wireless Internet connection you want to use. If a password is required, you need to type it in now. Wait for the laptop to connect to the Internet. In a moment the computer is going to state it has successfully connected to the Internet. Click Start, Run type in cmd and click Ok to bring up a command prompt. Type ipconfig /all and press enter and see if it gives you an IP address similar to 192.168.1.100. Check your wireless connection properties under My Network Places. Right click the wireless connection icon and choose properties. From there make sure Internet Protocol {TCP/IP} is listed, highlight it and click properties. Make sure Obtain an IP address automatically is checked and Obtain DNS server address automatically is checked. Make sure you Ethernet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys scroll to intergrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its enabled if still no joy Let's first try to start the wireless service i.e. WLAN AutoConfig service manually. To do this, login to the computer as an administrator. 1. Click Start, type services.msc and hit enter. 2. Locate WLAN AutoConfig service, double click on it to open its properties window. 3. Under General tab, change the Startup type to Automatic and click Start button. 4. Click Apply and then ok. For more information about the wireless settings, check this link: http://technet.microsoft.com/en-us/library/bb878035.aspx

First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty. Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.

Thirteen quick beeps at startup on an eMachines E520 usually indicate a problem with the laptop's RAM (Random Access Memory). This could mean that the RAM is not properly seated in its slot, or it could be a sign of a faulty RAM module.

Here are some troubleshooting steps you can try to resolve this issue:

Turn off the laptop and disconnect it from the power source.
Remove the battery from the laptop.
Locate the RAM compartment on the bottom of the laptop.
Check to make sure that the RAM module is seated properly in its slot. You may need to remove and reinsert the RAM module to ensure a proper connection.
Replace the battery and turn on the laptop.
If the problem persists, try removing the RAM module and testing it in a different laptop or using a different RAM module in the eMachines E520 to determine if the problem is with the RAM module itself or with the laptop's RAM slot.
If none of these steps solve the problem, it may be necessary to contact a computer technician for further assistance..

1. Boot the computer to the boot menu: To do this, restart the computer and press the appropriate key when prompted to enter the boot menu. On most eMachines computers, this is the "F12" key.
2. Select the CD/DVD drive as the boot device: Use the arrow keys to select the CD/DVD drive and press the "Enter" key to boot from it.
3. Insert the Windows ME boot disk: Insert the boot disk into the CD/DVD drive and restart the computer.
4. Choose the "Start Computer with CD-ROM support" option: When prompted, choose the "Start Computer with CD-ROM support" option.
5. Run the Windows ME setup program: The setup program should start automatically. Follow the on-screen instructions to install Windows ME.
6. Format the hard drive: During the setup process, you will be prompted to format the hard drive. Choose the "Full" format option to erase all existing data and perform a complete factory reset.
7. Install Windows ME: Continue to follow the on-screen instructions to complete the installation of Windows ME.

After the installation is complete, the computer should be in a factory reset state and you can begin setting it up as a new system. Please note that resetting your computer to the factory settings will erase all personal data and installed programs, so be sure to back up any important data before proceeding with the reset.

Check the hdd is setup correctly and set as first boot device. Ensure there is no external drive/usb installed.

e525 lapTOP OR? FOR GOT TO TYPE THE "e"????? 2009 MADE? 13 YEARS AGO? 2 causes (of many but 2 are CLASSIC COIN cell is now dead CMOS and boot order lost. or hdd bad the cure is, new coin, and reset bios and set boot order to hdd0 first the hdd must pass smart tests. or all hope is gone foR IT. ask how. that error means boot order wrong or hdd is bad. boot fails missing on hdd is bad HDD 99% the time. NO COIN LASTED 13 YEARS. AND MOST HDD SAME THING. UNLESS PUT IN TIME CAPSULE IN Ln2, CRYRO FREEZED. now the BAD NEWS the COIN cell is soldered down to the MOBO and is not a normal CR2032 it is ML1220 rechargeable listed as 5 year life.(MAKER OF COIN) so you fOUND this PC in a garage sale dead for $1?>???? no history told at all, ever fix old cars. ? emaciates now owned by Acer and Toshiba does this nasty trick "solder down" e525 actual there it is, in all its glory, lots of screws to get and soldering pen to release it, I cut the wires up top and solder then new coin to top wires. and not touch mobo PADS that is a huge hint there.(do no harm)

old that is and UNDERSTATEMENT IF ever there was. 2009 made. moved. desktop PC large. 1: monitor cable video not put back as it was or pins bent sloppy movers 2: PC fans spin or not. CPU and PSU it not PC has no power. 3: power lamp on PC must glow steady not blink does it , if dead this ,there is no power to PSU. the monitor message only means video from PC is DEAD ! it does not know why only that is is dead.\ video signals is this a VGA cable end to end my PC has 2 VGA ports one on mobo and one on GPU card only the one on card works. unless I remove the card. Last guy on VISTA 32 bit on earth, yes? wow, brave./ ouch OEM lost the manual (retired, EOL sure) AC cord to PC loose at ether end not using AC power jack direct to wall AC? other SIGNS on PC no sounds from PC no fans spin PC beeps? Blinking LED? or 100% silent and one evidence of any life whatswever. PS makes all right sounds fans etc. but monitor set to wrong input port, via OSD. that is it for now. lots more causes. we need all symptoms to progress.

microsoft has a license type called OEM which detects the computer that it is installed on and some computers have the licence key stored in the bios of the computer. So when you grab the old hard drive and put it in the next computer Windows will detect you changed computers and not run as per OEM licensing rules that it runs on only the original purchased computer. You might be able to run the drive as a secondary drive but you would need to install a new windows operating system and hard drive. And then use a partioning program to make the secondary drive not an active drive. also you new machine most likely has a different type of bios called EFI and you would have to change its settings to run AMI Bios but I do not think that is your problem as I think it is OEM but it might be worth investigating if you can run a legacy bios in the bios settings.

google that, the answer is near endless to 2nd hdd to external HDD to OOD CD_R, DVD-r , BD-r disks. burned ,using free imgburn.exe to any home server. to any USB stick memory to any web server on on earth paid admission you (off site is king) to the cloud. to high end TAPE systems. i keep mine on 3 of those places,.

hello and good morning. emachines are old and now owned by acer.com (gateway,etc) they OWN many old names. you are running XP right? the last man on earth to do so? XP is a virus magnet and doomed, it is time to upgrade. this PC is 2007 made. so is 12 years old, today.. the RTC coin cell battery will be no good now, replace it for $2 then reset BIOS inside BIOS screen " set default" then test the HDD, to be sure it is ok, if not? then reloading any OS of any kinds is not going to work with any bad HDD. Last, reload a new OS. there are the steps. and can be expensive, spent on any PC this old with zero street value. ($0 if broken a it is)

well lay the PC on its side do disk is up. not shake it a see is eject button works most driver, have the hail Mary pin hole there for the paper clip eject tub some of these confounding vertcles have non so must now be dismantled. NO PC told at all, model , one one clue. must be think cased mini desktops, infamous for that. EL1200? the other kind is there is no tray like my Sony PS3. it a grab out of the hand ODD, if kids put 2 disks in side it is now jammed. and must be dismantled, el1200 has front trap door, that drops down and the see a Laptop classic drive and the PIN hole see that./ NO PC told so crazy long answers all 3 technologies told.

Hi there. If your desktop has been overheating for any reason you will need to look at buying a new processor (cpu), power supply (if wires have been damaged from heat or voltage spike), or possibly a new motherboard. It would be advisable to have a computer shop look at the internal components of your desktop. Heat or a surge in power can damage the computer hardware. Good luck!

NO OS told, at all, we can not guess OS. came with windows 7 , is it still? if upgraded ports die. GL40 chip set is frozen at w7 max. forever. 2006 CPU , is not supported above w7 as Intel stated. endless. is it windows type winver in run box or control panel + system. do all usb ports work with a usb mouse , or keyboard or USB thumb driver? if not the USB ports are dead. if buying usb head phone ask them for w7 support, as many ended that now. if not running w7, (not told) then your ports are dead. or the phones do not support the unstated OS. see how hard I worked top answer , lacking NO OS told? drivers must match the OS and be available .

http://www.emachines.com/ec/en/US/content/drivers.html

well you lost it. many monitors on the rear see tiny power port called DC COAX that looks like laptop power. this is a line power wart power pack. here it is 12vdc 3amps. )more amps ok) https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=AC+Adapter+fit+eMachines+568+E15TS+E15Tr+E15Tg+15%22E17TR+780+LCD+Monitor+Ac+adapt&_sacat=0 scads of them. AC to DC power.

https://www.wimsbios.com/biosupdates/emachines/emachinesD525