20 Most Recent Lenovo 3000 V100 Notebook - Page 7 Questions & Answers

1. Use Device Manager's Firmware option and select Boot from EFI Internal Shell.
2. Use the EFI internal shell, as follows:
   1. Start the EFI internal shell from the EFI boot menu and select the drive with the Windows product DVD or Windows PE. The following example assumes that the drive is Fs0: Shell> Fs0:
   2. Start the EFI boot application. For example, on an x64 system, run the following command: fs0:> \EFI\BOOT\BOOTX64.EFI For an Intel Itanium system, run the following command: Fs0:\EFI\BOOT\BOOTIA64.EFI
   3. After the application starts, you may be immediately prompted to press a key to boot from the drive to continue. Press a key to continue booting from the installation media.
   4. After the installation is complete, you can check whether Windows used the EFI boot environment by running DiskPart and verifying that the drive is formatted using the GPT file structure and that the ESP and MSR partitions are present.

DETAILS.DETAILS.

Maybe it has something to do with audio and video codecs? Install codec packs from trusted source

upgrade your ram mem, best bang for the buck

http://www.zbshareware.com/download.html

You're going to need to list the model and make of your computer for me to help you :)As soon as you do, I will get you the driver you need. Thank you.

Step 1: Sleep Mode b> Sleep mode is primarily used with home computers (desktop computers). Sleep mode is designed to save the current work, programs, and settings of your computer using your computers memory, while using very little power. b> Hibernate Mode b> Hibernate mode is primarily used with laptop's. Hibernate mode is designed to save your computers current state on to the hard disk, then turn off your computer to stop using power completely. This mode is usually used when you do not plan on using your laptop for an extended amount of time. Benefits b> Using Hibernate mode is more power-efficient, but files may become fragmented over time by using this mode frequently. Sleep mode does consume more power, but the advantage that Sleep mode has over Hibernate is that it does not take as long to resume your computers former state when you are ready to continue using it.

when you try and connect, try right clicking the networks name and click on properties. If you click on the security tab, it may just be a case of, you need to specify which type of security you have on your network, or you may need to insert a password.

Hello download here at lenovo:http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-68104Please select the drivers for your windows system.Good luck

if you can find the short, cut the wire off by an inch on either side, now take wire strippers and strip the wires and join the two similar color wires with electrical tape make sure to do it one by one when your done test it then if all's good tape it up all nice

And you expect by this one lone statement, that someone else can?A) Lenovo laptop? Good. Now POST the model number.It's on the Bottom of the laptop.B) Solder wires connecting your motherboard to WHAT?Passing airplanes?State what you are trying to connect to. DC Power Jack to motherboard? Is the DC Power Jack a DC Power Harness? The DC Power Jack has wires coming off of it, that end in a plug connector.The jack plugs into the motherboard.Did the plug connector come off the wires?Post back in a Comment.Regards,joecoolvette

what wires? I have done board level repair and you need to be right on!

You can download the drivers from this WEB site.http://www.driversshow.com/drivers-ibm/ibm-thinkpad-drivers-for-29r7077.html

In none of your three posts did you state the laptop manufacturer, and model number.Model number is on the Bottom of the laptop.Post back in a Comment.Clear liquid?I really for the life of me cannot think what that would be.IF, Electrolytic Capacitors are used on the motherboard, and IF one or more were bad; the Electrolytic Paste ooze from inside would be more of a Yellow, or Brownish liquid.Someone spill part of a drink on your laptop, clean it up off the top real good; and not tell you?The Cooling Tube is part of the cooling system.Slightly flattened copper tube, sealed on both ends, and filled with Nitrogen.Wonder if a pinhole developed in it?I guess the only way to know is to L@@K inside, huh?Post the Product Number in a Comment.This is on the Bottom of the laptop.http://support.lenovo.com/en_US/FindProductNumber.pageI'll start by seeing if there is an HMM for it, and then look for pictorial info; on disassembly for you; AND give you guidance step by step as best as possible.Regards,joecoolvette[Oh, I know! Tell the little man inside not to slop water out of the bathtub!JUST KIDDING! ]