20 Most Recent Samsung LE32R74BDX 32 in. HD-Ready LCD Television - Page 6 Questions & Answers

SOUNDS LIKE THE LCD PANEL ITSELF IS GOING OUT OR THE LVDS CABLE HAS A PROBLEM. PROBABLY THE PANEL.

sounds like the power supply board has failed and should be replaced. most common problem for all samsungs.

Updating the Channel List Automatically You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.

2. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3. Press the ENTER button again, to select "Country".

4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for Analogue TV is not changed. (Refer to page 11 of the user guide)

5. Press the ▲ or ▼ button again, to select "Auto Store". Press the ENTER button. When it has finished, the number of scanned services will be displayed. The existing favorite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER button with "STOP" selected.

6. Press the EXIT button to exit. If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed. Check the aerial connection and the try the procedure again...sodeep

Just got through to Samsung support. Turns out the freeview card had frozen and needed a reset. To do this put tv on standby. then press in serries these buttons on the remote: 'info' 'menu' 'mute' 'power' TV will then turn on with a default screen. Press 'arrow down' button untill you reach option 12 'reset' . then push the 'right arrow' and tv will reset and start in plug and play mode and commence a scan when you've set the time. Just retuned mine and its back to normal. Hoorah!!! :-)

Just got through to Samsung support. Turns out the freeview card had frozen and needed a reset. To do this put tv on standby. then press in serries these buttons on the remote: 'info' 'menu' 'mute' 'power' TV will then turn on with a default screen. Press 'arrow down' button untill you reach option 12 'reset' . then push the 'right arrow' and tv will reset and start in plug and play mode and commence a scan when you've set the time. Just retuned mine and its back to normal. Hoorah!!! :-)

Yeah your decoder is giving on you and it needs to be replaced. www.partstore.com would have the part if you want to install it yourself.. But if you hvae a tech do it you looking around $150 upwards if you want a total solution.

Please rate and Thanks Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Updating the Channel List Automatically You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.

2. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3. Press the ENTER button again, to select "Country".

4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for Analogue TV is not changed. (Refer to page 11 of the user guide)

5. Press the ▲ or ▼ button again, to select "Auto Store". Press the ENTER button. When it has finished, the number of scanned services will be displayed. The existing favourite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER button with "STOP" selected.

6. Press the EXIT button to exit. If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed. Check the aerial connection and the try the procedure again.

If the channel icon is greyed out and you cannot tune the channels press the TV/DTV button on the remote control unit so that the icon is visible again and not greyed out. This will allow you to tune the TV.

Updating the Channel List Automatically You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.

2. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3. Press the ENTER button again, to select "Country".

4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for Analogue TV is not changed. (Refer to page 11 of the user guide)

5. Press the ▲ or ▼ button again, to select "Auto Store". Press the ENTER button. When it has finished, the number of scanned services will be displayed. The existing favourite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER button with "STOP" selected.

6. Press the EXIT button to exit. If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed. Check the aerial connection and the try the procedure again

Hi my name is Roety,
I hope I can help you with your issue ,
Sounds like the power supply is going bad, if you can solder the capacitors can be replaced and it will cost you less.
A repairman would charge between $250 and $400
If you can solder I can help with more details
　
　
　
If I have helped you with your issue please click accept.
If you have more questions you can still respond ,
I will reply asap
Thanks I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

Silly question, but have you swiched the laptop external screen function 'on' on the laptop ? This is normally done using the function (Fn) button in conjunction with one of the F keys.

Looks like the TV is in 'Shop' mode. To exit, with the TV switched on, hold the Vol down and Menu buttons on the side of the TV for 4 seconds - the screen will show 'Dynamic'. You should then have all of your functions back.

go to menu settings, channel settings, set tv to CATV for cable, AIR for analog, or HD for high def.

Make sure you have the correct cables depending on your connection

Hi,

Hardware related, needs an engineer as not a simple fix.

Thanks

contact to sky plus engineers they will solve it for free

Replacing capacitors on power board.

Hi, Depeending on the thickness of the lines matters. If the lines are Black and about 1-2 inches thick it may be a bad bottom buffer board or a bad panel (screen).
If the lines are thin 1/16 to 1/8 inch it is most likely a bad panel.
You can open up the set and depending on the model, see the thin board/boards running across the bottom with ribbon cables going to the panel. You may be able to attempt reseating the ribbon cables, but be careful as some retainer plugs break very easy.
If the lines are thick black and the reseating doesn't correct it you may be able to buy the coresponding buffer. Unfortunately some bottom buffers are actually part of the panel. If you are not comfortable taking it apart then call a professional but be aware labor charges start around $200 not counting parts, panels start at $600 up to over $1000
hope this helps
Thanks
Eric I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

no, you need the main board
if the tv turn on you need the main board if your
tv do not turn on you need the power suply

I had the same issue with my laptop after I upgraded my video driver. Check on the Toshiba website for the correct display driver for your laptop and download it. Follow their directions and install it on to your hard drive. If it is the same driver that came with your laptop originally, the default settings should allow you to connect back to your LCD TV and get the proper display. If that doesn't work you will probably have to call Toshiba support and ask them for the default settings.

Not all flat panel displays are perfect. You probably have dead pixels in your display. You need to check with your retailer to see what the warranty on your display is. Some units come with a zero dead pixel warranty, while others will not allow you to replace the display unless you have more than a fixed number of dead pixels. Your retailer should be able to furnish this information to you.