HP Compaq Presario v3000z Notebook - Answered Questions & Fixed issues

i dont know what kind of problem do you have but you can use Video Lan http://www.videolan.org/vlc/ download from here.

If you are using the Preinstalled version of Windows using the Recovery Disks or Recovery partition, you should be having the Bluetooth drivers.
However, you can download the drivers for the Bluetooth Hardware in your Notebook from the links provided below for Vista and XP :
Bluetooth hardware drivers for XP :
ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34264.exe


Bluetooth hardware drivers for Vista :
ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34275.exe

Note : If the Notebook is not having a Bluetooth hardware and by installing the Drivers, you may find a Bluetooth icon in the Taskbar and this doesnot mean that you have Bluetooth hardware in the Notebook

The simplest way to remove a BIOS password is to simply remove the CMOS battery. If we pull out this battery, the computer will forget alot of its hardware settings, including its BIOS password. This should not be performed on Laptops if you are not experienced working with laptop hardware. Anyway, open up the computer case using a screw driver and locate the flat, circular and metallic CMOS battery. It should look something like this : http://pctechnotes.com/wp-content/uploads/2009/09/remove-battery.jpg Some computers have this part standing upright. Once you have located it, observe how the latches are holding it. Make sure to power down the computer, unplug the power cables and unplug any USB devices if they are powered. The computer must not be able to get power from anywhere for this to work. Take out the CMOS battery and wait 10 - 25 minutes before putting it back in. Plug everything back in, power up the computer and enter the BIOS again. If everything went well there should be no more password. In some cases, if you get weird error messages during bootup now, you will need to goto "Load BIOS Defaults" in BIOS and save the changes to fix them.

remove the battery and try to start the machine om AC power only

regards

I beleive that you are trying to install retail versions of XP which will not be able to detect the Hard Drive in the Notebook as it is a SATA drive and Windows XP will not be having the drivers for SATA Hard Drives by default.
In this situation, I recommend you to check and disable the SATA Native support  option available in the BIOS.
Start the Notebook and start tapping the F10 key which will take you to to the BIOS Setup window.
In this, go to the System Configuration tab using the Arrow keys and select the option as Disabled next to SATA Native Support.
Press the F10 key again to save the settings done and exit BIOS.
Now, you should be able to use the Windows XP disk and install Windows XP Operating System in your Notebook without any issues.
By disabling the SATA Native Feature, the Hard Drive of the Notebook will be detected as a IDE Drive because of which we will be able to install XP without any issues.

Donot Re-Enable this feature in the BIOS again as the Operating System may not boot. Let the option next to SATA Native Support be Disabled.
Hope this helps...

Go to hp website, try this link http://www8.hp.com/ca/en/drivers.html then type in your computer name and follow the instructions

here is dirver link for u download the driver &insatll it
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1817059&lc=en&dlc=en&cc=us&lang=en

it is free for all, no need to download just register and login

From the receipt. From the warranty papers. From the store you bought it from.

Go back into your bios settings and choose "default" for the settings. That should reset everything back to factory parameters.

Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer Windows Advanced Options Menu Please select an option: Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Enable Boot Logging Enable VGA mode Last Known Good Configuration (your most recent settings that worked) Directory Services Restore Mode (Windows domain controllers only) Debugging Mode Start Windows Normally Reboot Return to OS Choices Menu Use the up and down arrow keys to move the highlight to your choice select safe mode with command prompt Click start run type cmd press Enter black screen should open DOS mode this will vary depending on your operating system type in net user username For eg. If you want to change administrator password , type net user Administrator It will prompt you to enter the new password. Enter the new password and the password is changed if this fails you will need to Select safe mode with networking to download you could download all of these or just one save them to a usb drive for later use if one fails to remove the password Windows Password Recovery Basic http://majorgeeks.com/CmosPwd_d239.html A CMOS BIOS password recovery tool Editors note: This tool should only be used by experienced computer users. Please see the enclosed read me if you would like to run it from Windows. Failure to follow instructions (from Windows) will cause your anti-virus to flag this as a virus. http://majorgeeks.com/Dr._Freeware_System_Utilities_d6416.html Dr.Freeware System Utilities which includes data recovery software, data backup, password reset tools for Windows helps you to maintain your system. Dr.Freeware is freeware, you can download and use it for free.

Overheating When the CPU overheats then it will shut down (i.e. thermal overload) and won't boot up again until it has cooled down. If this is the problem is not fixed then the CPU will eventually fail. A faulty fan causes the problem or the fan and heat sink assembly are clogged with dust. Check the CPU fan to see if it spins freely, if not replace the fan. If the fan and heat sink is clogged with dust the remove the dust and make sure the vents are clear and dust free. Use a small brush and can of compressed air to do this.

Try downloading the driver from the Compaq/HP WEB site. You can download the device drivers from the Compaq/HP WEB support/download page. Make sure you select your model laptop and the Windows drivers you require and install them. Click on this link to download the drivers: - www.compaq.com/country/cpq_support.html

go to Device Manager check ik enabled. Is it internal, external?, What software are you using?

could be a software fault but i would run a test on the hard drive, you will find out the make of the drive by going into mycomputer and right clicking properties, then hardware,and you will get a hard drive diagnostic software to test it on the manufactors website, its a place to start at least

Try HP's website to download and reinstall it.Get onlineand got to www.google.com In the google search box type: "HPSupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Download and install the Webcam drivers.You have to open the webcam software to activate or startthe webcam. There is no button to push or switch to turn on. Thewebcam software is somewhere in the program list. Click Start/Programs thensearch for any reference to webcam or camera. Sometimes the webcam mightbe inside one of the manufacturers folders in the program list so search thefolders for it. Some manufacturers have something like EntertainmentExperience that will open and show all the entertainment devices such as thedvd drive, webcam, media player, etc. if you see it click it to launch itthen click on the webcam or camera icon. Try using ManyCamYoucan always download Manycam and install it. Go to www.google.com and inthe search box type: "download.cnet.com" (without the quotes). Click on the link to go to the site. When the site opens look down on theleft and you will see a gray area that says Find Software. Type"Manycam" (without the quotes) in the white search area then hit thesearch mirror. When it brings back your results look for the one thatsays ManyCam Virtual Webcam. Down load it and install it. Make sureyou remove the check box on any junky programs it would like to install. Youonly want to install ManyCam, no additions whatsoever during the install. ManyCam is totally FREE and easy to use, and you will always know where yourwebcam software is.

Try the VLC Player, it plays everything. Try using VLC as your player. Go to www.google.com andin the search box type "download vlc" (without the quotes). Look for the Video Lan download from site www.videolan.org/vlc Downloadand install it. It downloads and installs in 3 minutes or so. It'sa very fast player, smooth and it can play just about any type of dvd formatsand media. It's totally FREE.

You can download the Microphone and device drivers from the Compaq/HP WEBsupport/download page. Make sure you select your model laptop and the Windowsdrivers you require and install them. Click on this link to download thedrivers: -www.compaq.com/country/cpq_support.html

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3450293#N465select the operation system you use..(select vista if you run windows7) and look under the driver-network ..You will find the lan driver , the wireless one ..and the bluetooth ..select it and download ..and run into the laptop ...restart and enable the bluetooth before use....This may also need to search for devices and add them in its list before using for transfer or pairing ..

have you installed the driver? is it usb or internal? theres not alot to go on there