20 Most Recent Amana ACD106R Wall/Window Air Conditioner - Page 8 Questions & Answers

do a google search for appliance parts. then pick a few results and try them

Check reversing valve and solenoid.

You said in another post that the error was c7. That means evaporator freeze. Too cold. That could be lack of air flow, bad sensor, ice on the coils.

That means evaporator coil is too cold, possibly iced, chech filters, fan speed, airflow, capillary tube

http://www.h-mac.com/product-catalogs/amana/Amana-RSKP0009-Installers-Guide.pdf

You can find it where machine specification are fix

possible low freon are the coils sweating or freezing up also is fan running

Check the GFI plug where it plugs into the wall and reset it. Also, plug something else into that plug to make sure you didn't pop the circuit breaker

Drain is usually out the back of the unit on the bottom to drain outside

probably from the outside fan check for leaves touching the fan blades or unbalance caused by a mud wasp nest on a bade ( back side of a blade )

If that fan stopped your compressor overheated, shut off on thermal overload. Carefully cool compressor with water hose and restart. If the big copper is cold ,small copper warm, compressor is running. Check capacitor on compressor If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

check to see if the compressor on the outdoor unit is running, if so it could possibly have a refrigerant leak or faulty 4 way valve