20 Most Recent
GE 1.4 cu. ft. Countertop Microwave in Black JES1456DSBB - Page 9 Questions & Answers
I need a wb39x75 Ceramic tray - GE Microwave Oven
Unfortunately, four web sites report that tray is no longer available, and is not being manufactured, and there is not a substitute. That means it is not for sale any where on the internet that was visible by searching.
Example:
https://www.searspartsdirect.com/part-number/WB39X75/0022/364.html
Unfortunately for you and others, if there is any chance at all, you may only find one from a second hand store, or perhaps someday on ebay or other used appliance web site. That might mean buying a used GE Oven and using the tray even it is not working otherwise.
How to distinguish whether S and E series fixed switches are 100M or GE switches?
The S600 provides GE downlink interfaces and GE or 10GE uplink interfaces.
The S1720-GFR provides GE downlink and uplink interfaces.
The S1720-GW, S1720-GWR, S1720-GW-E, and S1720-GWR-E provide GE downlink interfaces and GE or 10GE uplink interfaces.
The S2700 and S3700 provide 100M downlink interfaces and GE uplink interfaces.
The S5700 provides GE downlink interfaces, and some models provide 10GE uplink interfaces.
The
Huawei S6700 provides 10GE interfaces, and the S6720EI and S6720S-EI provide 40GE uplink interfaces.
I have a GE JKP62G microwave-oven combo. The oven works fine. The microwave blew the 15 amp fuse. When I replaced the fuse, per your earlier directions, and tried to use the microwave, the new fuse blew. Any suggestions for next step?
Cause 1
If too much current passes through the microwave circuitry, the line fuse will blow. If the line fuse blows, the microwave won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. If you don’t resolve the underlying issue, the new fuse will blow too
Cause 2
Main Control Board
The main control board might be defective. However, this is rarely the case. Control boards are often misdiagnosed—check all of the more commonly defective parts. If you have determined that all of the other components are working properly,replace the main control board.
Cause 3
Thermal Fuse
The thermal fuse cuts off power to the microwave if the microwave overheats. To determine if the thermal fuse has blown, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse is blown, it must be replaced.
Since its a electrical isue cal a liscenced professiona to resolve the issue . Your microwave oven isnt at fault . I belive the supplay to it has issue and would have blown anyway.
Not finding what you are looking for?